Few questions before I start modding

[akomismo01]

Hi guys! I'm back for a very long time, Im going to mod a psp 200 slim now with jewel, I have a couple of questions:

• What voltage does the backlight of the PSP have (Planning to put the backlight of the LCD at the UMD door
• Is it safe to use a copper wire? (The very thin ones? It is somewat plated with something i do not know so it protects the circuit)
• Is there any 3v pinout on the slim? If not, what resistors do I need for a 5 white leds?

THanks in advance guys!

[Modded Matt]

welcome

I do not understand your BL question
no, do not use magnet wire.
here are the pin outs https://www.acidmods.com/forum/index.php/topic,28586.0.html, use a resistor calculator to determine what resistor you need.
have fun

[akomismo01]

welcome

I do not understand your BL question
no, do not use magnet wire.
here are the pin outs https://www.acidmods.com/forum/index.php/topic,28586.0.html, use a resistor calculator to determine what resistor you need.
have fun

I mean, the backlight. My LCD broke so i took it out and had an idea to reuse the backlight of the LCD. How much voltage does it need to run?

May I also ask if SMD fuses are safe so that if i shorted out something, my MOBO is safe?

This one is a 2amp smd fuse
http://www.ebay.ph/itm/10Pcs-Littelfuse-SMD-0603-2A-2-Amp-Fuse-/180599475307?pt=LH_DefaultDomain_0&hash=item2a0c914c6b#ht_1411wt_907

This one is a 1amp smd fuse
http://www.ebay.ph/itm/10Pcs-Littelfuse-SMD-0603-1A-1-Amp-Fuse-/170579403087?pt=LH_DefaultDomain_0&hash=item27b753214f#ht_1469wt_907

This one is a 0.5amp smd fuse
http://www.ebay.ph/itm/10Pcs-Littelfuse-SMD-1206-0-5A-0-5-Amp-Fuse-/170578137880?pt=LH_DefaultDomain_0&hash=item27b73fd318#ht_1701wt_907

Which would work on the psp?

[Modded Matt]

I would not use sad resistor free formed in side the psp. You can but it may give you headache in the long run. I use 1/8w through hole resistors and a small piece of heat shrink tubing.

Good luck post pics

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2