[HELP] PSP 3004 Blacklight

[metavox]

Hi.. I'm new here..
I'm from Portugal and i need your help, i have a friend that brought me a psp 3004 that work but no blacklight.. I assumed that could be the fuse, but when i opened the psp, i see this:

so, can anyone tell me where can i get power for the backlight??

 

[nEoVaLoR]

hello, and welcome! hopefully we can get your PSP in working order.

if the backlight connector broke off, you can solder a wire to positive on the cable and one to negative, and wire them to the board.  i'm not sure what each of those pins are, but one of them is positive voltage for the backlight. hopefully its one of the middle pins because the other two appear to be torn off.

how good are you at soldering?

[metavox]

i'm good at soldering... i just need where to solder!! can i solder in the center connectors??

[nEoVaLoR]

i have no idea what pin is which, so if you can follow the traces from the pin and figure out yourself, do that. if not, you're going to need a multimeter. if you don't have one of those, i'll look online and see if I can figure out which pin is which. let me know!