help with jitter mod im a neebie plzz help me

[mhgg]

hello guys this is my first time posting anything on here and i might as well start with my first question i am pretty decent with the 555 timer chip rapid fir mods but ive never done a pic 16f i want to learn how to do a jitter mod not set up like a macro but like an 8 pin chip like the 555's also if you guys can show me some diagrams, pictures, and tuts on how to build a pic programer the easyest way, how to program and ect also can i program an 8 pin chip to have rf and the jitter mod plz help



Edit: i actually dont know what chips i should use i dont want to do anything over 8 or 10 pins

[Famas]

hello friend well here goes robbo is the main person for making jitter codes and he uses a 12f683 microchip the codes are all opensource on here

theres this code brand new
https://www.acidmods.com/forum/index.php/topic,38335.msg287251.html#msg287251

it also has rapid fire on left and right trigger this doesnt work on matrix pads very good at the moment im afraid

heres the jdm programmer too make but you need a really old computer for it to work and you cant read whats on the chip only write

https://www.acidmods.com/forum/index.php/topic,22283.msg280374.html#msg280374

if this doesnt work id recommend getting a pickit2 

[mhgg]

Thanks man and unfrotunatly i dont have an old computer i have windows 7 but do you have a diagram or pictures i can find to set it up or is it setup like a normal rapid fire because if it is then im fine but if theres other points i need to know then yeh should i check Robbo out or what?

[mhgg]

also i check out the new program code and i saw a diagram but it was very confusing it shows an 8 pin chip then a 16 pin socket with the power on the other end what do i use a 16 pin chip 8 pin or both

[Famas]

hey man yeah there loads of codes on here but robbo is the only code to have jitter with it if you want jitter its got 1 mode jitter 1 mode right trigger and one mode dual tirgger all full adjustable

ok here goes with what you will need

1. 1k resistor
1 pic programmer id suggest a pic kit 2
3 12f683 microchip you can get free samples from microchip.com i think you get 3
kynar wire 30 awg
and a pic socket (8pin dil)


ps its the one in my post not his its the one with just the 8 pin chip the 12f683
and also the wiring diagrams are in the link provided

[mhgg]

yo man thanks alot


for the free chip sample website which website do i go to and were do i go to order on the site to get it




also please don't double post, use the modify button.
-jrfhoutx

[mhgg]

for the free chip sample website which website do i go to and were do i go to order on the site to get it

[jrfhoutx]

just order them from mouser they're only $1.40 each...

[juggalo4lifexzx]

As well as previous guy my first time.. I don't have a chip like the pic or anything i want to know what the actual set up is for Jitter. i know XYY or YY. that is the easy wart what is the time between and all that is my question i just bout a chip from diablocontrollers.co and i can't get the jitter to shoot the Striker fast i mean it is faster but i know it shoots way faster than that. and i was wondering if anyone can give me the complete set up of how to do it. if you could just email me. with reply cause i don't get on the net offen and email would go straight to my phone.   if you don't want me to reply or ask anything else just say so.
if you want me to Delete your email after i get it I will. In Need of Help So Someone Please Help me?

[gmod]please do not put your email on the post please pm people if asked for it[/gmod]

[Modded Matt]

dont post your email in any open forum like that.. spam bots troll all forums looking for these then you get flooded with spam. (this is true of ANY forum on the net, not just ours)

to answer your question, there is no real direct answer. there are different speeds for each gun. you should have bought a viking if you wanted jitter. it will also be affected by your batteries etc.