Author Topic: cant get rf to work on matrix 1 or 2  (Read 2105 times)

Offline Fareham dave

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 61
  • Post quality +0/-0
  • Gender: Male
  • To Punish and Enslave
cant get rf to work on matrix 1 or 2
« on: February 05, 2013, 07:36:54 PM »
could my problems i been having with all th rf codes i try be to do with my diy jdm programmer? i have programmed a couple of flasher codes onto chips and that worked fine. it just seems all the rf codes i try have random instabilitys each time. I only have matrix 1 and 2 controllers aswell?

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: cant get rf to work on matrix 1 or 2
« Reply #1 on: February 06, 2013, 05:05:41 AM »
doubtful.


Offline Fareham dave

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 61
  • Post quality +0/-0
  • Gender: Male
  • To Punish and Enslave
Re: cant get rf to work on matrix 1 or 2
« Reply #2 on: February 06, 2013, 05:36:32 AM »
ok, with that ruled out i will fit flex or topfire again then and post up pics of my wiring if i can get my camera to work. i have flex fitted in a controller i did over a year ago on a matrix 1 that works fine, but it seems that i havnt been able to get any others to work since.

ok so i found this on xboxscene.com from RDC

"TP5 on this board is 0.5v off and 1.8v when on, versus the 0v/1.8v of the old Matrix."

And i found this on google aswell for the best power source, that my guess is 0v off/1.8v on

« Last Edit: February 13, 2013, 10:03:58 AM by Fareham dave »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal