Console Modding------ ( Here you can talk about your favorite Consoles ) > Tutorials
Reset Glitch Hack RGH
Rodent:
--- Quote from: Anonamous on February 05, 2013, 02:04:19 PM ---Great job bro.
Just a side note, RGH 2.0 is extremely unreliable on falcon motherboards. I have ever got it to work on my falcon.
--- End quote ---
I think theodor613 had the same issue on 14719 dashboard do to it being RGH2.0 , he wasn't able to to create the ecc. he had sent me the nands i kept getting a error , I need to try it again since they updated j-runner since i last tried it.
Edit just tried it now here is what i got
Nand Initialization Finished
Comparing...
Bad Block ID @ 0x0388 [Offset: 0xE91000]
Bad Block ID @ 0x0389 [Offset: 0xE95200]
Bad Block ID 0388 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0388 [Offset: 0xE91000]
Bad Blocks Remapped
Bad Block ID @ 0x0388 [Offset: 0xE91000]
Bad Block ID @ 0x0389 [Offset: 0xE95200]
Bad Block ID 0388 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0388 [Offset: 0xE91000]
Bad Blocks Remapped
Nands are the same
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 1.6
CB_A: 5773
CB_B: 5773
CD (image): missing
CD (decrypted): 9452
* checking required versions...
ok
* patching SMC...
! Warning: can't patch this Falcon type SMC!
* Replacing CD...
* XOR HACK NEEDED FOR CB 5773
* patching CB_B...
patchset for 5772 found, 4 patch(es)
* Applying XOR Hack to CB_B 5773
*** Re-encrypting CB_B with xor keystream
*** Fixing entrypoint
* Replacing CB_A 5773 with 5772
* encrypting CB...
* constructing new image...
Failed to create ecc image
Gizmo613:
that was my first attempt at rgh, and i corrupted the nand while reading it. i have since rgh2.0 2 falcons and both have decent glitch times. Both glitches in about 10-25 secs. the longest a rgh 2 falcon glitched on me was 2 minutes.
Rodent:
Incase anyone wants to build a LPT Programer for programing the cool runners or mod chips you will have to supply 3.3 volts to the chip to program it . I used the 3,3 volts off a dvd drive or off my ck. made a jumper wire for it.
snowcolt17:
nice tutorial.. if i didnt use my SLIM (thanks rodent for pointing that out) alot on live i would do this
Rodent:
here are some pics of a RGH jasper 512 i just did phat console, this one boots in about 5 to 7 seconds, not my best but still good. will add some more pics of finished console and video , waiting on whisper fan and clear case to come this week.
bottom of the board
top of the board
testing after i installed it to make sure it still boots
shows it booted started on 13599 dashboard
Customer wanted orange Leds.
Video finished for a customer
XE_Will Jasper 512mb RGH By Rodent_Modz.mov
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version