Author Topic: Original Xbox Mod Chip (Read 22754 times)

Rodent · « **on:** February 07, 2013, 07:04:51 AM »

Ok I done Softmodded xboxes with out a modchip now i am bored!!! I have done Jtags and Rgh's and few other modifcations like Dual nand's and TX Fusions for RGH consoles... So now i am going old school , I have a few Orignal Xboxes and there boring to play just Regular Xbox.

My question is what is the best mod chip out there for the money to Take a orignal Xbox and use a mod chip? I see they run for anywhere from $5 to $30 which is perfect cause not only am i going to just add the mod chip I have other plans to mod one of these consoles.

If you can help me with the best one that i can do the most options with that would be great. I have done some Research and really not sure what is the best .

whitetop · « **Reply #1 on:** February 07, 2013, 07:23:02 AM »

i have a Xecuter 2.6 CE in my 1.6 clear xbox

if you want cheap and easy install get a Duox-2 one of the easiest ones i know and ive installed loads of modchips in the xbox 1
but i tell you its not really that easy to get it.

Rodent · « **Reply #2 on:** February 07, 2013, 07:30:40 AM »

Thanks whitetop for the fast reply, I seen they have a Xecuter3 , i am sure that is a upgrade form the Xecuter 2.6 and is there big difference in what it does compared to the soft mod?

whitetop · « **Reply #3 on:** February 07, 2013, 07:41:05 AM »

no not really they all do the same from my point of view but the 3.0 has more wires to install the duo and 2.6 are just 1 wire and sits on pinoffs

unless your fuzzy just try a duo very easy to install and sites with no switch that can easy be lost like i did on my XC 2.6 lol but got it back.

Rodent · « **Reply #4 on:** February 07, 2013, 07:46:32 AM »

I will have to check it out and see ... any possible way of changing to a different Cd or Dvd rom? that will be just as compatiable? i know there complicated dvd drives meaning that they didn't make many that work with it.

whitetop · « **Reply #5 on:** February 07, 2013, 08:09:16 AM »

i have not messed with the drives as i just put the modchips in them i was going to do a slim xbox some time back but never got around on doing so i think it will be best to look that one up. i have seen people put smaller drive in and just took all the case off on the drive and put the drive board else were. if your thinking of modding it like you said in the chatbox ill like to see that happen

Rodent · « **Reply #6 on:** February 07, 2013, 08:16:54 AM »

That is the plan. just the soft mod is cool but like to add more to the mod. and like you said finding a mod chip is hard to find.. the idea has been thought of for a while just need to start putting it on paper to make it work. hoping it will all fit in the cage for the slim xbox if not other modifications will have to be done to do this mod.

whitetop · « **Reply #7 on:** February 07, 2013, 08:19:13 AM »

yeah sounds good well if you cannot find one i mite sell me spare duox 2 but not sure if it still works lol been so long its been in my draw

Rodent · « **Reply #8 on:** February 07, 2013, 08:20:38 AM »

Sounds good of if you can find on in the UK for sale i would beglad to pay you for the chip and your time and the shipping of coarse

whitetop · « **Reply #9 on:** February 07, 2013, 08:22:35 AM »

lol one in the uk not so easy due to that law some time back. it took be just over 6 years to get a XC 2.6 mod chip and that was because i got a 2rd hand modded xbox.

Rodent · « **Reply #10 on:** February 07, 2013, 08:23:32 AM »

That sucks

Uai · « **Reply #11 on:** February 07, 2013, 12:48:57 PM »

Modchips for Xbox are quite useless now with Xbox Live being gone. The only advantages I can recall is the ability to use unlocked hard drives, lba48 support for bigger hard drive support, changing boot colors/whatnot, multi-bios, and can be more newbie friendly.

As these chips are bios replacements, flashing the TSOP is equivalent to having a chip once done. It does require some soldering however and is not compatible with version 1.6

Quote from: Rodent on February 07, 2013, 07:30:40 AM

Thanks whitetop for the fast reply, I seen they have a Xecuter3 , i am sure that is a upgrade form the Xecuter 2.6 and is there big difference in what it does compared to the soft mod?

I believe the Xecuter 3 supported it's X3LCD screen while the 2.6 did not. It's not the only chip with this support, SmartXX did and there were other screen mod boards but it was more of a diy approach rather than Plug and Play.

Quote from: Rodent on February 07, 2013, 07:46:32 AM

I will have to check it out and see ... any possible way of changing to a different Cd or Dvd rom? that will be just as compatiable? i know there complicated dvd drives meaning that they didn't make many that work with it.

I not too familiar with regular PC drives, I believe original Xbox games would not work but I have no idea if backup would run. You will have to figure out the tray open/close detection may have to restart it every time... There is also the GDR-8163B and SD-616T PC drives that can be made compatible on the Xbox with the SD-605B and 8050L firmware as well as soldering for the Xbox 12 pin power cable.

Edit: Anti-Spam question,
What year is it today?
The forum accepted 2012 and not 2013.

Rodent · « **Reply #12 on:** February 07, 2013, 12:55:00 PM »

Thank you Uai for that information. like i said i have soft modded these in the past. and was thinking of just adding the mod chip just for fun and also putting the orignal xbox in the newer slim version case. just some ideas i had.

Some really good information you left me there. and maybe for other members also. It doesnt matter for xbl its just because i want to do something different.

another question i have is being i want to possibley change the dvd drive and still be able to work , i am hoping to down size the hdd , by using a laptop hard drive. 2.5inch drive instead of the 3.5 that came in the consoles.... I know only certain drives can be

after you install them. being the eeprom has to unlock and lock the key when booting the console.

Modded Matt · « **Reply #13 on:** February 07, 2013, 02:50:00 PM »

Quote from: Uai on February 07, 2013, 12:48:57 PM

Edit: Anti-Spam question,
What year is it today?
The forum accepted 2012 and not 2013.

I keep writing 2012 on all my paperwork and my secratary keeps changing it for me at work..... Where is rodent? LOL JK I fixed it.

Rodent · « **Reply #14 on:** February 09, 2013, 04:14:39 PM »

Really hard to find a mod chip , I will find one I am sure . if anyone comes across one let me know

whitetop · « **Reply #15 on:** February 10, 2013, 07:16:30 AM »

rodent one way is to just buy a 2rd hand chipped one as 70% on sites they are old fake chips and the real ones are that hard to get.

unless your mate or a supplier can get them don't take notice when others say they can get them if no one else can.

Rodent · « **Reply #16 on:** February 10, 2013, 07:22:45 AM »

Quote from: whitetop on February 10, 2013, 07:16:30 AM

rodent one way is to just buy a 2rd hand chipped one as 70% on sites they are old fake chips and the real ones are that hard to get.

unless your mate or a supplier can get them don't take notice when others say they can get them if no one else can.

yea i been looking , really impossible to find looks like just have to do a soft mod with the console and try to move forward if i can with the mod. Thanks whitetop

also think i can get a 2.5 hdd to work in the console? being they have to be

with the key from the console?

whitetop · « **Reply #17 on:** February 10, 2013, 09:09:40 AM »

yes you can this is how people do the slim mod of the xbox if you google you will find the info of cloning the hdd 3.5 to the 2.5

Rodent · « **Reply #18 on:** February 10, 2013, 10:34:43 AM »

sweet thanks man for your help going to start mocking things up this week . so should have pics soon.

Edit 2/21/13 Thanks to Gizmo613 he has gotten me a DuoX3 Xbox Modchip
http://www.modchipcentral.com/store/duox3-xbox-modchip.html

and
Xapt3r v1.6 No Solder Adapter
http://www.modchipcentral.com/store/product.php?productid=17808&cat=273&page=1

waiitng on some other stuff i ordered also to change from IDE to Sata adaptor for the hdd and looking in to small 2.5 hdd to use with this mod!

hopefully i get to mocking this up soon

gameroms · « **Reply #19 on:** July 03, 2013, 12:16:00 PM »

Rodent, i know this is a old topic but i have a x3 with the halo green case with the halo green xecuter faceplate with xlcd & x3 ir if you still need it.

Rodent · « **Reply #20 on:** July 03, 2013, 01:07:00 PM »

Quote from: gameroms on July 03, 2013, 12:16:00 PM

Rodent, i know this is a old topic but i have a x3 with the halo green case with the halo green xecuter faceplate with xlcd & x3 ir if you still need it.

Got some pics? looking to do a new mod when i get the time so this might make top it off

and thanks for reply

gameroms · « **Reply #21 on:** July 03, 2013, 01:19:43 PM »

The 3 face plates are included, one is a spare xecuter that i use for parts because my son lost a few buttons on the 1st one. The original has the x3 bank switch on it that i used before i got the xecuter faceplate.

All you would need to do is replace the dbl sided tape on the smaller chips and get a pin header for the x3 chip & install.

I also have a motherboard that has 128mb of ram, i added 64mb to the bottom of the motherboard where the empty memory slots were, not a whole lot that uses the extra memory other than emulators.

welcome back to the forum, please note double and triple posting clogs up the front page recent posts. Please use the modify or edit buttons on the left side of your post. Thanks

KingMike_OS · « **Reply #22 on:** July 03, 2013, 02:58:13 PM »

I take it what you want for it

and don't care for the motherboard with RAM as all my xbox has that Ram Upgrade it was good for old mame day for larger rom

now you can run them all with Kawa or FBAx don't need ram to run them

Rodent · « **Reply #23 on:** July 03, 2013, 04:06:07 PM »

Thanks king mike for the info you posted and gameroms how old are those pics? got pics with dates and name? I am a very trusted seller on here and would like to see some up to date pics , also. how much you looking to get for everything?

gameroms · « **Reply #24 on:** July 03, 2013, 04:46:33 PM »

those pics were taken the minute you asked me to take pics. I give you my work on that and guarantee that it all works.

As far as price goes im just looking to get a viking macro from matt, im not sure of the cost of the viking macro, he only has one let so who ever covers the cost of the chip this stuff will be yours.

I would think that i would have earned the trust of you guys as much as i helped mike and tested for him and keeping all the code we shared private. you work out the cost with matt for the 1 viking makro he has left and all these parts will be yours. I'm not trying to break it off in anyone.

KingMike_OS · « **Reply #25 on:** July 03, 2013, 04:53:00 PM »

when taking a pictures of item to sale or trade its one of the rules to put date and Your user Name in the Image to show that you have the item in hand no hard feeling just the rules

ok I get the chip from matt and send it to you
I want all that stuff pack and ready to ship

and please ship ASAP once I get tracking I don't want to wait few weeks for it

gameroms · « **Reply #26 on:** July 03, 2013, 05:08:31 PM »

Dude, i will get all the old double sticky tape from the back of the smaller pcb's so its easier for you guys to install, i would never do anyof you guys wrong on here.. Its not hard to potoshop dates on them but thats not what im about. ill post better pics after i get all the old dbl sided tape off. Almost have all the dbl sided tape removed from the small pcbs and im going to bag the seperatley x3ce stuff in one bag, xir stuff in another bag and so on to make it easier for you guy to follow the install directory, i know this stuff is worth more than a viking macro but its what friends are for.

Rodent · « **Reply #27 on:** July 03, 2013, 05:48:34 PM »

ok so gameroms your trading all that with king mike? is that what i am getting from this? let me know either way thank you.

gameroms · « **Reply #28 on:** July 03, 2013, 05:55:24 PM »

It was offered to rodent first, so i need to know if you want it.

im packaging it up now the way that it came so it doesnt look like a mess and easier for u to install.

I took some more pics for you, i have all the sticky tape removed from the small pcbs and everything seperated into its own bag, the x3 chip ans all its parts is in a antistatic bag, tha x3 ir ans all its componets is sealed in its own antistatic bab and the faceplates will be individual wrapped. i also found a x3 1.6 lpc rebuild kit.

this is going to be a great deal for anyone, if it doesnt work out here ill put it on the xbox-scene and sell for seperate.

its hard to believe after all the stuff i did years ago to help out that you dont trust me but thats cool

KingMike_OS · « **Reply #29 on:** July 03, 2013, 05:58:10 PM »

Rodent let me take this please I send you something nice team xecuter items for jtag xbox 360 since you love to do that so much

let me know if you need something what ever you like

News:

Author Topic: Original Xbox Mod Chip (Read 22754 times)