Author Topic: topbuzz led flasher (Read 13170 times)

3D0kassiah · « **on:** April 15, 2013, 02:56:35 PM »

well ive always liked using toppbuzz's led flasher code but i thought to myself maybe i can do for a cleaner install

on hold until further notice

Gizmo613 · « **Reply #1 on:** April 15, 2013, 03:02:25 PM »

This Is Something I Might Be Interested In For My Class. You Think You Can Whip Up A Board For Soic As Well. My Class Is Learning How To Solder Smd Components.

3D0kassiah · « **Reply #2 on:** April 15, 2013, 03:07:11 PM »

Quote from: Gizmo613 on April 15, 2013, 03:02:25 PM

This Is Something I Might Be Interested In For My Class. You Think You Can Whip Up A Board For Soic As Well. My Class Is Learning How To Solder Smd Components.

ahh really? ok will post up later lol just for u theo

Gizmo613 · « **Reply #3 on:** April 15, 2013, 03:09:10 PM »

You Dont Have Too. Lol, Was Just Thinking While Typing.

3D0kassiah · « **Reply #4 on:** April 15, 2013, 03:16:55 PM »

Quote from: Gizmo613 on April 15, 2013, 03:09:10 PM

You Dont Have Too. Lol, Was Just Thinking While Typing.

already doing it

Gizmo613 · « **Reply #5 on:** April 15, 2013, 03:21:04 PM »

You The Man!!

Rodent · « **Reply #6 on:** April 15, 2013, 05:17:26 PM »

Nice work and this makes it easy for the lazy person who doesnt want to put any effort in to soldering..... lol

Gizmo613 · « **Reply #7 on:** April 15, 2013, 05:47:27 PM »

Hehehe that's me

Rodent · « **Reply #8 on:** April 15, 2013, 05:52:12 PM »

Quote from: Gizmo613 on April 15, 2013, 05:47:27 PM

Hehehe that's me

still have to program the chip...lol and solder to the board and the leds.

Bigandrewgold · « **Reply #9 on:** April 16, 2013, 06:32:10 PM »

I got bored so I designed my own

(Keep in mind I only spent like 10 minutes on this, so it aint that great, and something minght not be wrong). What do yall think?

And 3DO, is this pad necessary?

3D0kassiah · « **Reply #10 on:** April 16, 2013, 07:54:48 PM »

Bigandrewgold · « **Reply #11 on:** April 16, 2013, 09:04:23 PM »

Quote from: 3D0kassiah on April 16, 2013, 07:54:48 PM

no its not

happy? and just wondering why you would place the gnd so far apart like that?

ecstatic

But I was making everything really spaced out because I was just doing this to see if I actually remembered how to use diptrace(I had/have no intention of actually getting it printed). Here's a more compact version I just put together(its .36 square inches). Tbh it could still be smaller(You could just have 1 ground pad and wire the 4 led ground wires and the controller ground to it; and everything could still be closer together), but, meh, its not really necessary(you'd save like 5 cents printing it)

3D0kassiah · « **Reply #12 on:** April 16, 2013, 09:27:18 PM »

well thank you for sharing and for your input as of right now im happy with my design and i really dont care if anyone takes an interest or not
but for fellow members who do decide this is something they want ill be more then happy to help out
my mission here is to try and do my part i will release this for free to anyone who wants it i

Gizmo613 · « **Reply #13 on:** April 17, 2013, 05:09:00 AM »

im always interested in your projects 3do, especially if it benefits me on my school work.

ViSioNXx · « **Reply #14 on:** April 17, 2013, 05:28:07 AM »

I want a few of those!! Nice Job.

Modded Matt · « **Reply #15 on:** April 17, 2013, 05:40:08 AM »

make it smaller and post the file so I can have them printed. you only need one ground, the led negatives can go directly to any ground on the controller. so the extra pads are not needed. also change the chip type to a soic package.

3D0kassiah · « **Reply #16 on:** April 17, 2013, 06:15:39 AM »

gonna remove thread with correct files and pix

Rodent · « **Reply #17 on:** April 17, 2013, 06:16:38 AM »

Now make it smaller and more compact ....

so it will fit behind the Motherboard.

3D0kassiah · « **Reply #18 on:** April 17, 2013, 06:23:54 AM »

Quote from: Rodent on April 17, 2013, 06:16:38 AM

Now make it smaller and more compact .... so it will fit behind the Motherboard.

it will fit behind the motherboard that thing is small
picture the size of those resistors there the same size as xbox controller leds

Rodent · « **Reply #19 on:** April 17, 2013, 06:52:41 AM »

Quote from: 3D0kassiah on April 17, 2013, 06:15:39 AM

smallest i could get the board which is dam small
removed gnd pads and switched from dip to soic
resistor size is now 0603 not the original 0805
comments

good concept make it so its programmable right on the board . will be easy to change from fader to flasher... lol

awesome work

ViSioNXx · « **Reply #20 on:** April 17, 2013, 07:06:06 AM »

Love it!

Gizmo613 · « **Reply #21 on:** April 17, 2013, 08:24:24 AM »

Just A Suggestion, You Can Run A Vias For The Bottom Left Resistor To Its Pad. Rather Than Run A Trace Along The Bottom Of The Board.

Modded Matt · « **Reply #22 on:** April 17, 2013, 08:49:35 AM »

that would add a layer adding to the printing cost.

Gizmo613 · « **Reply #23 on:** April 17, 2013, 08:53:13 AM »

i thought of the same thing matt, but i just check the price at osh park. it cost the same $1.35 per set of 3.

3D0kassiah · « **Reply #24 on:** April 17, 2013, 08:54:15 AM »

dont think oshpark takes single sided boards
i managed to get it single layer but kept rejecting it until i added a via and bottom trace
plus i think there biggest thing is how big the pcb is not much how complex it is

Gizmo613 · « **Reply #25 on:** April 17, 2013, 01:11:42 PM »

i do have one question though, the diagram from ghost says 150 ohm resistor. but in the topbuzz thread for this code. it says 100 ohms. would either be fine?

3D0kassiah · « **Reply #26 on:** April 17, 2013, 03:07:30 PM »

Quote from: Gizmo613 on April 17, 2013, 01:11:42 PM

i do have one question though, the diagram from ghost says 150 ohm resistor. but in the topbuzz thread for this code. it says 100 ohms. would either be fine?

try either one
files and pic is fixed enjoy

Gizmo613 · « **Reply #27 on:** April 17, 2013, 03:09:56 PM »

thanks for the reply and awesome on the fact that you will release a dip package as well

Rodent · « **Reply #28 on:** April 17, 2013, 04:34:52 PM »

Could make these yourself if you have a laser printer? and the stuff to etch ?

3D0kassiah · « **Reply #29 on:** April 17, 2013, 04:44:44 PM »

yes most radio shack have the supplys to do it
ill do a print preview and post it and you will need a drill to drill out the via the circle thing

Gizmo613 · « **Reply #30 on:** April 17, 2013, 05:33:09 PM »

thinking about doing this.

Gizmo613 · « **Reply #31 on:** April 30, 2013, 06:12:09 PM »

Top buzz led flasher

a short video i did of the code on a pic12f683 with the install diagram. still waiting on the boards to get in.

Gizmo613 · « **Reply #32 on:** May 07, 2013, 05:26:48 PM »

here is the completed soic version

ViSioNXx · « **Reply #33 on:** May 07, 2013, 06:06:55 PM »

Love it. Gotta get me a couple. one day lol

Gizmo613 · « **Reply #34 on:** May 07, 2013, 09:17:10 PM »

let me know, vision, i can have it pre-assemble for you.

Rodent · « **Reply #35 on:** May 08, 2013, 06:57:06 AM »

looking good Gizmo

Gizmo613 · « **Reply #36 on:** May 09, 2013, 08:20:35 AM »

Thanks Rodent, Im Gonna Be Selling These And Donating Some If The Money To 3Do, So He Can ContiNue Make These Great Boards.

Gizmo613 · « **Reply #37 on:** May 13, 2013, 05:13:20 PM »

here is the led flasher and a proto led board i asked 3do to make for me.

Led flasher with prototype led board.

ViSioNXx · « **Reply #38 on:** May 13, 2013, 06:11:25 PM »

Nice!! I wonder if it will power a 12v strip?

Gizmo613 · « **Reply #39 on:** May 13, 2013, 06:22:33 PM »

With The Right Resistor You Can Use A 12V Strip.

Rodent · « **Reply #40 on:** May 13, 2013, 06:27:16 PM »

when can we hae a sample? of the board?

ViSioNXx · « **Reply #41 on:** May 13, 2013, 06:34:52 PM »

I think what 3D0 told me was 10 bucks for a populated board...

Gizmo613 · « **Reply #42 on:** May 13, 2013, 06:42:21 PM »

Im Gonna Put Together One Kit Consisting Of 1 Flasher And 2 Led Boards. They Will Be Populated With The CorreCt Resistor AccordiNg To The Led Color. It Will Be About $30 Shipped. Gotta Factor In The Total Cost And Shipping. Then Ill Get A Real Figure.

ViSioNXx · « **Reply #43 on:** May 13, 2013, 06:50:35 PM »

Cool. Keep uis posted on prices! I want to get one of the rf boards he made done also.
I have the flasher chip coming I hope so maybe I can talk 3d0 down a little

Rodent · « **Reply #44 on:** May 13, 2013, 06:52:29 PM »

Quote from: Gizmo613 on May 13, 2013, 06:42:21 PM

Im Gonna Put Together One Kit Consisting Of 1 Flasher And 2 Led Boards. They Will Be Populated With The CorreCt Resistor AccordiNg To The Led Color. It Will Be About $30 Shipped. Gotta Factor In The Total Cost And Shipping. Then Ill Get A Real Figure.

THat is how much the pulse vu2 sold for.

Gizmo613 · « **Reply #45 on:** May 13, 2013, 07:00:20 PM »

Led Flasher Fully Populated, Led Board Fully Populated Shipped For $25. Each Addtionally BOard Leds Is $5 Populated. Pulsevu Doesnt Come With Leds, Just 3 Extra Modes Fader, Music Pulse And Breather Effect.

3D0kassiah · « **Reply #46 on:** May 13, 2013, 07:20:04 PM »

rodent we didnt forget about u lol got new stuff coming dont worry
gonna talk to gizmo soon and ima go by whatever his prices are as far as i go im only doing all this for donations so whatever members or whoever wanna donate to me is cool so i can continue to do little projects here and there and the reason im asking for donations personally so i can order pcb's and test test and test im gaining more by learning so in the end its cool
only thing that sucks is i wish i can order in huge amounts so everyone can play with them but due to personal reason i dont have much funds to play around with nowadays....growing up sucks lol
ima let gizmo take it away

Gizmo613 · « **Reply #47 on:** May 13, 2013, 07:25:52 PM »

yeah, im trying to earn money to help 3do out.

snowcolt17 · « **Reply #48 on:** May 14, 2013, 02:36:31 AM »

oh i like i like. iteresting. need to try this one day..

3D0kassiah · « **Reply #49 on:** May 14, 2013, 03:01:25 AM »

just to clear things up when i say donations i dont mean send me 10 20 30 bucks even if its a dollar or 2 itll add up in turn willl let me buy more pcbs

Rodent · « **Reply #50 on:** May 14, 2013, 07:05:13 PM »

here is the first mod i did with topbuzz led flasher

XBOX 360 CONTROLLER MOD WITH RF

News:

Author Topic: topbuzz led flasher (Read 13170 times)