Psp Go will not tun on!?

[crowpath]

I disassembled it to do some mods and reassembled it and when I try to turn it on.. I only get a flicker of the power led.. that's all I connect the charger to it and it's charging and I know the battery has juice! I don't have any Custom Firmware if that may be the problem.

[3D0kassiah]

I disassembled it to do some mods and reassembled it and when I try to turn it on.. I only get a flicker of the power led.. that's all I connect the charger to it and it's charging and I know the battery has juice! I don't have any Custom Firmware if that may be the problem.

told you to be careful 
first thing first go back and recheck if everything was reconnected correct and retry
second if everything looked ok remove any modifications you made from leds to wires see if that works
maybe take some pics to see if we can see anything you might have missed of the area you made mods to

[crowpath]

Is there anyway to turn on the psp with the backplate off??

[3D0kassiah]

of course the back plate has nothing to do with anything
hell i have my motherboard out with the battery attached and works fine
some pics would be nice

[crowpath]

I don't have a good camera.

I just bridged something and now the Psp does not turn on at all.

[Gizmo613]

Take A Picture As Best As You Can. You Dont Need A Good Camera, Just A Good Picture. Otherwise Itll Be Hard For Anyone To Help.

[3D0kassiah]

if you tried to do that led mod you prob fried that cap you were using
better yet on the switch you can use the top shield to get gnd
use a multimeter see if your getting any readings
disconnect everything and take it back to stock