Need a step by step guide please for installing LED's under ABXY buttons

[TheHybrid1987]

I've been looking all over the Internet trying to find a place to show me how to install LED's under my ABXY buttons can somebody please help me with this? For an Xbox one controller thanks

[Demonboy]

we have a search bar man, there are quite a few well written guides on this site.

[WHITE 4ND N3RDY]

I'll try to direct u better to help u out. First thing would be to post your request in the proper area: Ex  xb1 section not under electronics.

Here is a link for xb1 controllerhttps://www.acidmods.com/forum/index.php/topic,43235.0.html

AND

https://www.acidmods.com/forum/index.php/topic,43242.0.html

Here is a link for xbox 360 https://www.acidmods.com/forum/index.php/topic,33937.0.html.

Hopefully this helps u out. Just like demonboy said look through the toolbars in the section pertaining to the controller walkthrough your inquiring about. Good luck and let us know how it goes!

Xbox one abxy is not as detailed as the 360 tutorial. I'd look through it as it can help u in areas like using a dremil tool to clean out the inside of the abxy buttons and more detailed pics of LEDs being wired together to work with the buttons. It should provide better visual instructions that share the same principles in instillation as the xb1 controller.

Another thing I'd do is just dig around the xb1 section and look @ all threads. I just quickly pulled these up for examples.

[TheHybrid1987]

Thank you.

I was actually looking for a LED install for the ABXY buttons not guide button

[mod]Please use your modify tab at the top so u Dont double post thanks.[/mod]

[Modded Matt]

See this tut:
https://www.acidmods.com/forum/index.php/topic,33937.0.html

If you cannot use that to understand what you need to do for the xbox one, you are going to have a lot of issues and you may want to purchase a controller prebuilt. I sold the ABXY I did for $150 shipped.

[WHITE 4ND N3RDY]

The links I have listed to u are the only tutorials that I could dig up. Like Matt stated I've listed more than enough links for u to figure out how to make this mod work on a XB1 controller.

Since your new here i'll help u out one more time and suggest that u read all the tutorials I posted for u. Here is one more link for XB1 controller board schematics "To help u know where to wire your LEDs"

https://www.acidmods.com/forum/index.php/topic,43204.0.html.

Everything can be easily accomplished as long as u put the research into it. I have no problems helping members out but I will not in the future be walking u through every directory to figure out how to mod something.

If u run into technical problems during your install just start a new thread in the XB1 section and state your problems and/or provide clear pictures of your install and u will get a professional response quite promptly from other qualified members or staff.

Thanks for joing acidmods and please feel free to share your work throughout your build. If anything u can help make a more clear detailed install for the xb1 abxy lighting mod.

[TheHybrid1987]

Thanks and I apologize I am new here.