Author Topic: Delidded Xbox 360 Slim..  (Read 4560 times)

Offline gameroms

  • Granny Spanker
  • *
  • Posts: 376
  • Post quality +3/-0
Delidded Xbox 360 Slim..
« on: October 31, 2013, 11:27:33 PM »
I am going to add a TX Slim Proto and a Demon to my Trinity so I decided to Delid the IHS and replace the TIM, I searched and couldn't find any info for the proper way to do it on a 360 slim so I just did it like you would on a PC.  The factory TIM was dried out so hopefully this will help.  I'll update my temps once complete.









Warning:  DO NOT ATTEMPT IF YOU DON'T KNOW WHAT YOU ARE DOING BECAUSE YOU COULD MESS UP YOUR 360 BEYOND REPAIR.
« Last Edit: November 01, 2013, 11:04:16 AM by gameroms »

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Delidded Xbox 360 Slim..
« Reply #1 on: November 01, 2013, 05:25:48 AM »
Use AS5   Artic silver 5 for the Thermal paste!   do not use the stuff your using

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Delidded Xbox 360 Slim..
« Reply #2 on: November 01, 2013, 06:00:03 AM »
I use artic silver 5. its 10$ of a small tube that does about 3 xbox 360s

Offline Gizmo613

  • MFH
  • Acid Modder
  • *
  • Posts: 547
  • Post quality +17/-0
  • Gender: Male
  • Acidmods User
Re: Delidded Xbox 360 Slim..
« Reply #3 on: November 01, 2013, 07:42:49 AM »
I Use Artic Silver 5 And Artic Mx4. I Get About 3-5 Celcius Degrees Lower Eith Mx4.

Can You Shed Some Info On Deliding.
« Last Edit: November 01, 2013, 07:43:39 AM by Gizmo613 »

Offline gameroms

  • Granny Spanker
  • *
  • Posts: 376
  • Post quality +3/-0
Re: Delidded Xbox 360 Slim..
« Reply #4 on: November 01, 2013, 11:30:01 AM »
I just use the Liquid Ultra between the Die and IHS, not sure what I am going to use between the IHS and Heatsink.  I have to order something for between the IHS and the Heatsink.

I wonder if I can replace the the long xclamp studs from the slim with the short xclamp studs from the phat and do away with the IHS?  I have lapped the heatsink so its perfectaly flat.

As for Delidding advice I unplugged the fan and used a IR temp gun and got te temp up a little to soften the glue between IHS and die, I then used the razor blade to cut some of the glue and used one of the $5 IHS tools on ebay.


Also I have a free sample of this product coming to test the contact between Die - IHS and IHS - Heatsink.

http://www.sensorprod.com/fuji-prescale.php


Update:
these guys are sending me 5 free tubes of IC 24c & enough Fuji Prescale paper to test the contact and pressure of my heatsink and IC is going to pay for 6 of the Prescale samples to be digitally analyzed for their first 360 test and info for the site.

Ill post pics and stuff when i do the test.

http://www.innovationcooling.com/

http://www.sensorprod.com/

[admin]Please do not double post click modify to edit. [/admin]
« Last Edit: November 05, 2013, 03:55:01 PM by Rodent »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal