« previous next »
Pages: [1]   Go Down

Author Topic: DS4 jdm-030 wont turn on  (Read 6525 times)

Offline knowsly

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
DS4 jdm-030 wont turn on
« on: April 03, 2019, 12:31:07 AM »
Hello folks,

I haven't another controller to comparison atm,so may someone help me to determine the voltages of this spots ?

also it will be very useful if tell me the source of(arrow pointed one)trace comes from.



symptoms:

-wont turn on w/ fully battery
-wont turn on directly(via cable) w/o battery
-ribbon connecting and usb connector are OK
-there isnt any hot area/ic when controller is connected

let me know if you need more info.

Thanks


Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: DS4 jdm-030 wont turn on
« Reply #1 on: April 03, 2019, 04:01:12 PM »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline knowsly

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: DS4 jdm-030 wont turn on
« Reply #2 on: April 03, 2019, 09:56:15 PM »
Many thanks mate

I went the source of pin 17;under de chip
may it come from the other side of de board ?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: DS4 jdm-030 wont turn on
« Reply #3 on: April 04, 2019, 07:11:40 AM »
There is no 'source' for pin 17. You wanted to know where the spot you marked came from.

Large Inductor (your marked spot), Pin 17, Capacitor, that's all that is on that trace.



Now the other side of that large Inductor is a different story. It goes thru another Inductor, and then to pins 13 and 14, and it also goes to an internal layer somewhere.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline knowsly

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: DS4 jdm-030 wont turn on
« Reply #4 on: April 04, 2019, 12:19:44 PM »
All I want is in this image you already uploaded.
ty sir.
Logged

Offline knowsly

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: DS4 jdm-030 wont turn on
« Reply #5 on: April 07, 2019, 04:29:48 AM »
forgive me @RDC

Whats de role of pin 4 ?(it going to ARM ic)



I fixed power problem but now my controller wont recognise by windows(failed driver).



« Last Edit: April 07, 2019, 04:30:38 AM by knowsly »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: DS4 jdm-030 wont turn on
« Reply #6 on: April 07, 2019, 07:17:28 AM »
Your pinout there is backwards and missing a pin.




1 - GND
2 - LED BLUE
3 - LED RED
4 - LED GREEN
5 - LED VCC
6 - GND
7 - 5v USB
8 - 5v USB
9 - GND
10 - D- USB
11 - D+ USB
12 - GND
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline knowsly

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: DS4 jdm-030 wont turn on
« Reply #7 on: April 07, 2019, 08:26:54 AM »
ew my bad ..
many thanks

so I have a problem related to D- USB and D+ USB,right ?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: DS4 jdm-030 wont turn on
« Reply #8 on: April 07, 2019, 07:37:40 PM »
I have no idea, because pin 4 on your diagram is LED Red.

That FFC cable can become damaged if you remove and reinsert it even 1 time. I'd look at it first and make sure the 'fingers' (contacts) of it are still good on both ends, because they can easily be damaged and peel up.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline knowsly

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: DS4 jdm-030 wont turn on
« Reply #9 on: April 10, 2019, 07:26:49 AM »
all voltages are now OK(regulator replaced) and the ds4 work correctly on win environment.
my new problem is, it wont recognise by ps4 anymore!!

so I have no idea too.I dont give up.ill report here if I found any success
Logged

Offline sanjua_vino

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: DS4 jdm-030 wont turn on
« Reply #10 on: October 17, 2024, 11:11:30 AM »
Quote from: RDC on April 03, 2019, 04:01:12 PM


Hola, podria compartirme info de esa reparaci?n. tengo la misma situaci?n. no enciende con el bot?n de PS, no enciende ning?n led, funciona todo lo demas perfecto y hasta carga, pero con cable.  gracias, saludos
« Last Edit: October 17, 2024, 11:12:48 AM by sanjua_vino »
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal