Elite Series 2 Powers on with cable, not without

[InternetC]

So I don't know where to check now. I've replaced the battery and that didn't help. I can plug in the USB-C and it powers on just fine. If I unplug it, the on button will flash two minute then shut off. Seems like it's not a battery issue. So it's just when trying to turn it on with the On (xbox) button it doesn't turn on. I am able to connect to bluetooth after unplugging it as well and it will stay on. Actually it's just the button itself it seems as when I press it, it also doesn't bring up the home screen. Not sure what the issue is. Will see if I notice anything.

[RDC]

Check R35 on the top board, 0 ohm jumper. After that, make sure the trace is good from the Guide button to J3p11. If that's good, then look on the bottom board and make sure CR1 is still on there, if it is, then look for trace damage.