Console Modding------ ( Here you can talk about your favorite Consoles ) > Xbox 360 Soft mods / JTAG support
RGH
Rodent:
--- Quote from: Gizmo613 on December 30, 2013, 10:52:13 AM ---you can't program it unless you have the lpt cable built first.
The diagrams can be found using the TX J-Runner software. Head over to TX forums and download it.
Also how are you gonna read and write the nand? this is required to get your consoled to be rgh'ed.
If you feel you are not up to do this, there are members here who can offer the install sevices. eg: Rodent and myself.
--- End quote ---
I agree with Gizmo
aslo to save your self alot of time and trial and error as me and Gizmo experienced in the past with trial and errors your probably better off sending to one of us , saves you time , money and your console in the long run and you can have it back in a couple of days!
nicmo:
I have most of the parts to build the cable just the 3k3 resistor I'm waiting on. How can I read the nand?
Gizmo613:
please Search Ths Forum Or TX Forums For The Rgh Guide. Then Read, Read And Read. If At That Point You Are Not Convinced You CAnt Do It Yourself, Seek Professional Installers. The Guides Tells You Everything You Need And Step By Step Instructions.
Rodent:
--- Quote from: nicmo on December 30, 2013, 04:49:40 PM ---I have most of the parts to build the cable just the 3k3 resistor I'm waiting on. How can I read the nand?
--- End quote ---
the LPT programer i showed you is to program the coolrunner like 3do said you will still need a 3.3 volts power the chip also you will have to build another LPT to read the nand shown in or Jtag seciton made by crazy-modder that is so you can read the nand the time you take to do all that i can have the console back to you faster completely done same as if GIZMO does it ...
nicmo:
Ok read the NAND with nandpro but did read 254 at 199, I did it 3 times and the same thing and the 2 last was identical when I compare. I read with -r16 is the right size? How can I tell if I have a 16mb,256mb or 512mb? Do I move on to the next step to program the coolrunner?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version