Dual 12f1822 I/P chips for XB1 rapid fire/mods. They opperate independently but are routed to save wiring and space.
The LT,RT,V,G & led are basically shared connections with the main chip. The second chip just clones these connections on the first chip.
The chips operate off two 6×6×7 mm tacts. Each tact controls each chip. The modes on each chip compliment each other to work as one unit with 100s of different combinations. That's pretty much it in a nut shell.
I have still a lot of work. I have to get registered on eBay have my brother help me make a portfolio ( I'm not very computer savy) Then become RBST here. I Dont want to get too in detail but when I complete these following steps I'll show everyone what I've been working on!
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs30.postimg.org%2F6y85vdh25%2FIMG_20140328_163241_855.jpg&hash=d9c7c733841f5ff308ae6829110dff54712a5790)
This is my completed setup. Just showing pics for now. Like I said works in progress. I have to finish the rest of my requirements before I can go to production.
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fs12.postimg.org%2Fpmu2rpbop%2FIMG_20140328_165023_554_1.jpg&hash=bd2be3c76989a3a216778871c8a5391283e7c171)