PSP USB CHARGE MOD QUESTION

[rafaliyo86]

Well guys i was watching a vid on youtube about a psp charge mod. They guy said that he did the mod wihout soldering and in the description put a link from AM.

I have tried to follow the link but its missing. Could somenone how to do it without soldering??

This is the vid:

http://www.youtube.com/watch?v=i-Wzzr9DU54&feature=player_embedded#

And with soldering i would have to follow this pic??




Thanks in advance

[Natas Fo Nos]

I was just looking for the exact same thing! God damn it...

[Demonboy]

http://www.amazon.com/Sciplus-Electrically-Conductive-Soldering-Wire/dp/B000Z9H7ZW/ref=cm_cr_pr_product_top


ive used this when i REALLY dont want to solder something but u have to be carefull because the glue itself is whats conductive and its a little harder to clean than solder so yea... but its an option should u not wanna solder.

[Natas Fo Nos]

That's even more complicated because I gotta order it. Thanks anyways though.

[Demonboy]

thats the only solution i can think of for a solderless fix, i have some just chilling because its pretty awesome when i dont wanna use heat in sensitive electronics... but yea

[Modded Matt]

NO, NO, NO. Do not attempt this with conductive glue. you will ruin the psp. I say this because on the USB port shown in the pic above, the pins are MM apart. you will short the pins together and fry the psp.

The pics are correct, use a soldering iron.

[Demonboy]

he asked for a solderless solution i gave him 1 with a warning haha... i use this mainly on things that i cant get hot tho and the tip on mine is a super fine syringe thing... but yea dude get some flux for like 4 bucks a iron for like 7 bucks from harbor freight and some 60/40 solder which is dirt cheap and ur good to go... hell i used a dirt cheap soldering iron for years.... it was hard at 1st but it got the job done... now i have a cordless iron and flux and omg it heats up like a champ and my joints are flawless and neat

[Natas Fo Nos]

I have the stuff to solder, I just don't want to mess up and don't like soldering anyways. I'm wondering after looking at that picture if there is another way to do this mod without opening the PSP up. The pins you would solder to on that white thing go through the board and onto the battery posts, maybe there is a way to attach the same wire there?