« previous next »
Pages: [1]   Go Down

Author Topic: Help with Wii U Controller Stick Board  (Read 4406 times)

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Help with Wii U Controller Stick Board
« on: January 02, 2014, 11:34:43 AM »
Hi guys

A friend of mine carried his console to a shop becuase the stick didn´t work right (I don´t know why he didn´t made use of the warranty). After a few days the shop gave him the console back and told him that they couldn´t fix it.

We decided to fix it and once we opened it we realized the PCB was damaged. Here are two pics:




I have tried to find a replacement with no luck :(

Do you know if there is any place to get it? becuase i don´t know if it would be possible to make a pcb for it

Thanks in advance
Logged

Offline Gizmo613

  • MFH
  • Acid Modder
  • *
  • Posts: 547
  • Post quality +17/-0
  • Gender: Male
  • Acidmods User
Re: Help with Wii U Controller Stick Board
« Reply #1 on: January 02, 2014, 12:13:51 PM »
After Seeing That, I Would The Shop Pay For A New One. They Damaged It.
Logged

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Help with Wii U Controller Stick Board
« Reply #2 on: January 02, 2014, 12:21:53 PM »
It was some months ago so I suppose they won´t pay :(
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Help with Wii U Controller Stick Board
« Reply #3 on: January 02, 2014, 03:46:01 PM »
It wouldnt be that hard to fix the board if you had the new stick.
Logged

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Help with Wii U Controller Stick Board
« Reply #4 on: January 02, 2014, 04:46:00 PM »
Quote from: Modded Matt on January 02, 2014, 03:46:01 PM
It wouldnt be that hard to fix the board if you had the new stick.

I have it, its like a PS3 stick
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Help with Wii U Controller Stick Board
« Reply #5 on: January 03, 2014, 03:22:11 AM »
Clean it up as best you can.

Install the new Stick and anything that doesn't work (the Y-Axis for sure isn't going to) wire it up directly to the connector.

1 - Ground
2 - X-Axis
3 - Voltage
4 - Y-Axis
5 - Stick Button
« Last Edit: January 03, 2014, 03:23:28 AM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Help with Wii U Controller Stick Board
« Reply #6 on: January 03, 2014, 03:53:24 AM »
Thanks for the replies guys.

RDC these pins are of the conector but I would have to know what are in the stick. I just have to follow the traces right?
« Last Edit: January 03, 2014, 03:54:15 AM by rafaliyo86 »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Help with Wii U Controller Stick Board
« Reply #7 on: January 03, 2014, 03:55:13 AM »
Yes, follow the traces, it's all right there.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Help with Wii U Controller Stick Board
« Reply #8 on: January 03, 2014, 04:00:49 AM »
Ok, the last question I have its about Voltage, what's the point in the pcb? (I can't see it in the picture and i don't have the pcb here now)
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Help with Wii U Controller Stick Board
« Reply #9 on: January 03, 2014, 04:05:42 AM »
No idea what that means.

It's pin 3 on the connector. Look at both sides of the PCB and follow the traces thru the Vias, can even do it from the pics.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Help with Wii U Controller Stick Board
« Reply #10 on: January 03, 2014, 08:22:13 AM »
In this side this would be the points (I believe GROUND would go where I mark)



But VOLTAGE would go on the other side to the PCB?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Help with Wii U Controller Stick Board
« Reply #11 on: January 03, 2014, 08:41:35 AM »
1 is Ground
3 is Voltage

The same as they were when I first replied.

Going by that picture
POT on the Left - Top is Voltage, Middle is Axis, Bottom is Ground.
POT on Top - Left is Ground, Middle is Axis, Right is Voltage.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: Help with Wii U Controller Stick Board
« Reply #12 on: January 03, 2014, 08:50:32 AM »
I missundertood you sorry. It would be like this?

Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Help with Wii U Controller Stick Board
« Reply #13 on: January 03, 2014, 09:19:48 AM »
That's exactly how it is. They just use traces on both sides of the PCB to do it.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal