Console Modding------ ( Here you can talk about your favorite Consoles ) > Xbox 360 Soft mods / JTAG support

System freezes

(1/4) > >>

nicmo:
Hi to all im having an issue after xbox trini RGH2 freezes about a minute after it glitch any suggestion why? I'm using CR rev c default settings 2-3 has resistor and jp.

Gizmo613:
could be a number things, post up some pictures so someone can help identify the problem.

Things to check are the ground wire location, CPU rst wire length and location(avoid the inductor coils), and or the timing files used.

rafaliyo86:
Is it a falcon motherboard?

Rodent:

--- Quote from: nicmo on March 19, 2014, 11:24:23 PM ---Hi to all im having an issue after xbox trini RGH2 freezes about a minute after it glitch any suggestion why? I'm using CR rev c default settings 2-3 has resistor and jp.

--- End quote ---

open the JP  do not bridge

did the console work fine before you rghed it?  if so reflash the updflash.bin.   also check how the blue wire is routed. could be causing the console to freeze if poor connection or the way its routed  check the orange wire for the b wire is  that could also be an issue and make sure your E and F are correct on the console   and post some pics  like Gizmo stated   

timing file you should of used  Should of been clicked RGH2  TRINITY!



--- Quote from: rafaliyo86 on March 20, 2014, 07:30:07 AM ---Is it a falcon motherboard?

--- End quote ---
he stated its a Trinity rgh2 which all slims are rgh2 :)

rafaliyo86:
ohh I didn´t see it is a trinity board. I know falcon RGH2 have problems with freezes

Navigation

[0] Message Index

[#] Next page