Console Modding------ ( Here you can talk about your favorite Consoles ) > Xbox 360 Soft mods / JTAG support

System freezes

<< < (2/4) > >>

Rodent:

--- Quote from: rafaliyo86 on March 20, 2014, 08:16:59 AM ---ohh I didn´t see it is a trinity board. I know falcon RGH2 have problems with freezes

--- End quote ---
If  your falcon rgh2 is freezing then  its probably the console   I use CR3 lite on them and  bridge lk1 and use settings 1 and 5 on S2 dips on   and S4 1 on   only done 1 falcon rgh 2  and use the slim blue wire for falcon rgh 2 also timing file A  and jasper rgh2 

Jasper rgh2 settings and using a coolrunner rev c

Remove C8 cap bridge  2 and 3   slim blue wire  bridge the cap for jasper Timing files A  try that and see if you get better results  and JP open (not Bridged)

nicmo:
Ok I removed the Jp resistor still freezes so should I cut the blue wire shorter? It doesn't freeze so quickly as before when I'm on the dashboard just when I'm about to play a game.

Rodent:

--- Quote from: nicmo on March 20, 2014, 09:45:41 AM ---Ok I removed the Jp resistor still freezes so should I cut the blue wire shorter? It doesn't freeze so quickly as before when I'm on the dashboard just when I'm about to play a game.

--- End quote ---
sounds like gpu issue  if its freezing on the dashboard  if its fine when your sitting on the dashboard?  and it freezing during game play i say the laser is bad or dvd drive issue causing the game to freeze  cutting the blue wire shorter will only cause more issues  in boot times

nicmo:
I play from hdd and i get a red light on the power button  when i turn it on after it freezes some time.

Gizmo613:
time for a reflow or a reball. sounds like the cgpu is giving out.

Navigation

[0] Message Index

[#] Next page

[*] Previous page