Author Topic: Pulsevu with jasper rgh2  (Read 1709 times)

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Pulsevu with jasper rgh2
« on: November 19, 2014, 04:58:15 AM »
[spoiler]My problem is i have installed rgh on this jasper 512mb console  , and installing a pulsevu being they both draw 3.3 volt power from the same spot. i can not draw that much power to power both chips due to the console will RROD .
took some pictures to show you guys so hopefully you can help me figure out the best way to drop either 5v power from the 5 volt spot to 3.3v that i have the wire dangling from in pic  is there another good spot i can pull 3.3volt consistant power with out damaging anything or should i use a volatage regulator to drop the power from 5v to 3.3 volts ? mainly trying to do this the safest way with out damaging the console or the pulsevu chip.

added this pic so you can see how the pulsevu is installed with out coolrunner chip




I happen to find this pic on 360HQ.com special thanks to scarface
[/spoiler]


Fixed and working just fine

http://youtu.be/UeidUKlKMvY

update
http://youtu.be/glKp8EKzNLM?list=UU6YTy7Xitl4VP5gzfvEsJNA
« Last Edit: November 20, 2014, 02:29:47 AM by Rodent »

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal