Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Yes it looks similar to a 360 and I already verified the 12v source and ground locations on the connector and spliced for power I've never used a led storm kit how does it work if u don't mind me asking because I already have tip31s and tons of strip ledsIn that pic top left connector goes to broadband card the others are for the bluray and hard disk drives. I see cables that go from Hdmi to rca so I'm sure I can find the audio signal on the hdmi Jack but Will the digital signal drive the leds with a tip31? I hate to mess anything up.I have an old 360 I might play around with to see if we can get a tip31 to run off a digital signal from an hdmi port without risking my Xbox oneI'm not ok with a Mic on the storm led sitting in a case being unresponsive also was gonna do a 3 position switch so I can power them with and without the tip31 and also cut them off[admin]Please use edit to modify all your post! Please do not double triple and quadruple your post![/admin]
You only have a digital audio signal on hdmi, you probably need to convert it to an analogue signal prior to using it for sound reactive mods. I think you can get hdmi audio extraction boards fairly cheaply on ebay.