Author Topic: Guide Button snapping/unsnapping (on screen)?  (Read 2026 times)

Offline GrooveZoidberg

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • My dad totally owns a dealership.
Guide Button snapping/unsnapping (on screen)?
« on: March 17, 2015, 09:23:09 PM »
I have a problem with some of my controllers and am wondering if yall have a clue?

When im testing a controller(after i've put it back together), sometimes it does a weird guide button thing.  Where it flashes the Snap/unsnap panel (like it would if you're pressing guide fast, a few times).

And this happens a few times a week, to different controllers.

I've recently started keeping the two pieces of board together instead of now worrying about the pairing.  Enough time hasn't passed to tell if that was the problem.

I guess my question is, has anyone else had this problem?

It happens to non-modded controllers too.

Also,  is this the place i post questions like this? I suck at forums, i promise to get better.

Offline steve666666

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Guide Button snapping/unsnapping (on screen)?
« Reply #1 on: July 19, 2015, 05:06:26 PM »
Hi, i get this problem from time to time as well!

Did you find out the problem?

Or can anyone else help?

Thanks :tup:

Offline GrooveZoidberg

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • My dad totally owns a dealership.
Re: Guide Button snapping/unsnapping (on screen)?
« Reply #2 on: July 19, 2015, 07:29:57 PM »
Nada boss.

I'm still interested in finding out the problem though.

Any insight would be super helpful :)

Offline Gizmo613

  • MFH
  • Acid Modder
  • *
  • Posts: 547
  • Post quality +17/-0
  • Gender: Male
  • Acidmods User
Re: Guide Button snapping/unsnapping (on screen)?
« Reply #3 on: July 19, 2015, 08:23:54 PM »
It happens sometimes to me. but it was only on older rechargeable battery packs. I fixed mine with either brand new packs or just using AA batteries.

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Guide Button snapping/unsnapping (on screen)?
« Reply #4 on: July 20, 2015, 11:46:34 AM »
no clue. If I had to make a guess, the guide button is getting PWM feedback from the LED. but  you state it happens on unmodded controllers so IDK. Never had this issue myself.
« Last Edit: July 20, 2015, 11:46:55 AM by Modded Matt »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal