ps4 wireless controller jdm-011 resistor values

[Dark Knight_TJ]

hello guys!

i saw this is a great forum for talking about ps4 controllers and i'm having some troubles with one of them. it has a jdm-011 motherboard but actually is not korking anymore because 2 resistors burnt, can someone please tell me which value are they?. thanks in advance.

http://es.tinypic.com/view.php?pic=1535i83&s=9#.WNmPKGejmUk

[RDC]

They are both 2.7k but if they are fired then I would seriously doubt replacing them will correct any issues, as they are just a couple of Pull-Ups on some control or data lines. That thing probably has at least 1 fried IC now as well.

[Dark Knight_TJ]

Thanks For answering.  Actually controller no longer charges or turns on. Measured voltaje near battery and shows near 2.3v  which i think is not enought for charging nor turning on,  am i wrong?

[RDC]

It's a single cell LiPo, so it should be 4.1v/4.2v when charging and no less than around 3.2v or so ever. If the battery alone measures 2.3v then it's most likely bad now as well.