Author Topic: Xbox One S controller analog circuit  (Read 1462 times)

Offline Suzie1990

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Female
  • Acidmods User
Xbox One S controller analog circuit
« on: February 20, 2018, 12:19:48 PM »
Hi all,

I currently studying on an electronics course and have decided to do a project based around the analog circuit of the Xbox controller. Currently waiting for a damaged controller I brought on Ebay to be delivered, but thought I would do some research now as well.

After some information if anyone has traced the analog joystick circuit on the Xbox One S controller, if there are any integrated circuits between the analog stick and the microcontroller?

I Have been reading some posts and also other websites with modifications that breakout the Xbox controller into a gaming joystick setup, but not found any further information on the circuit from these yet.

Thanks Suze

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Xbox One S controller analog circuit
« Reply #1 on: February 20, 2018, 04:32:17 PM »
There's nothing between the Sticks Analog lines and the MCU pins, just some decoupling caps is all.

They're really nothing more than voltage dividers.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal