Console Modding------ ( Here you can talk about your favorite Consoles ) > 360 Controllers / 360 Rapid Fire Controllers

Need help with a connector pinout

(1/1)

neilthe4th:
So my friend asked me to fix his plug and play controller cord that has gotten old, on the side of the connector to the controller I didn't take caution to see where eache cable went and the board itself doesnt specify. I'm hoping to find what each of the 7 pins of the controller respond to since I can see the buses that the solder points go to.

Basically I'm asking for a pinout of the port where the plug and play controller connects to. i hope it isn't too much trouble.

RDC:
The 7 connections of the PnC connector just go to the controller, the 5 connection one needs the USB cable wired up to it.

On your second pic there, the back of the board, left to right.

5v (Red), D- (White), D+ (Green), GND (Black), GND (Shield)

neilthe4th:
Thank you so much :D

RDC:
Welcome.

Navigation

[0] Message Index