« previous next »
Pages: [1]   Go Down

Author Topic: jdm 040  (Read 2494 times)

Offline francescodmx

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
jdm 040
« on: February 27, 2019, 02:36:21 AM »

hi guys I'm new I ask you if you can help me, I have 4 dualshock 4 with motherboard jdm 040, they all have the same defect are turned off.
I tried to change the chip with flat charging connector but nothing.
is there any fuse on the motherboard that blocks ignition?
Logged

Offline francescodmx

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: jdm 040
« Reply #1 on: February 27, 2019, 05:04:59 AM »
can anyone help me?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: jdm 040
« Reply #2 on: February 27, 2019, 08:49:48 AM »
If 2 hours, 28 minutes and 38 seconds is all the patience you have, then doing component level troubleshooting on a DS4 board is really not going to be your cup of tea.

There are no fuses on the board.

What chip have you been changing? Pics?

Does the controller work with a fully charged battery from another controller?

Does it work connected with the USB cable? or do anything at all when connected to a PC over USB?

Is the FPC cable from the motherboard to the microUSB/LED board good? It's very easy to ruin the contacts on those cables, even if they are only unplugged and reconnected 1 time.

Do you have a working JDM-040 to use for comparison?
« Last Edit: February 27, 2019, 08:52:22 AM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline francescodmx

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: jdm 040
« Reply #3 on: February 28, 2019, 05:01:21 AM »

hello I apologize for the rush.
I mounted a chip and flat a working 040 jds but nothing happens.
I also tried to connect a charged battery but nothing.
I also connected the joystik to the PC but does not see the led remains off as if it were not powered.
I have repaired many joystiks but with regard to this flaw I have not been able to understand the damage
I think it's a factory defect since I've had 4 motherboards with the same problem
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: jdm 040
« Reply #4 on: February 28, 2019, 05:56:47 AM »
What chip?
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline francescodmx

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: jdm 040
« Reply #5 on: February 28, 2019, 08:17:10 AM »
chip of carge
Logged

Offline francescodmx

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: jdm 040
« Reply #6 on: March 07, 2019, 08:46:34 AM »
can you help me?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: jdm 040
« Reply #7 on: March 07, 2019, 08:50:05 AM »
Chip of carge (guessing you meant charge) really tells me nothing, so I still have no idea what you have done to the controller.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal