« previous next »
Pages: [1]   Go Down

Author Topic: Name and value component please  (Read 1086 times)

Offline vincaldo

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Name and value component please
« on: June 10, 2020, 12:39:02 AM »
Hello, I'm looking for the name of the component which is no longer on the jdm 055 card, I think it's a capacitor but I don't know its value, can you help me please? Sorry ,i m french and my english is bad  :dntknw: :dntknw:


https://imgur.com/a/S2m3ejy


« Last Edit: June 10, 2020, 07:57:56 AM by vincaldo »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Name and value component please
« Reply #1 on: June 10, 2020, 03:35:32 AM »
Upload the photo to any hosting website then post the link.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline vincaldo

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: Name and value component please
« Reply #2 on: June 10, 2020, 07:30:40 AM »
 :hifive:
« Last Edit: June 10, 2020, 07:58:50 AM by vincaldo »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Name and value component please
« Reply #3 on: June 10, 2020, 03:59:13 PM »
That is just a decoupling Capacitor on the Analog voltage rail. It's value is around 100nF, but you can just leave it off, it will not hurt anything at all with it missing.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline vincaldo

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: Name and value component please
« Reply #4 on: June 11, 2020, 12:13:22 AM »

Thank you for your answer. My character moves by itself when I play, I change the joystick twice, but I still have the same problem, I told myself that it could come from this component that I can be removed without paying attention.
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Name and value component please
« Reply #5 on: June 11, 2020, 06:30:09 AM »
That Capacitor could not cause that issue.

Moves by itself how exactly? and in what direction/s?

Moves fast, like stick is pressed all the way?

Moves slowly, aka drifts, like it is barely being pressed?

Moves randomly on it's own?
« Last Edit: June 11, 2020, 06:33:18 AM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline vincaldo

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: Name and value component please
« Reply #6 on: June 11, 2020, 06:52:09 AM »
My character advances very slowly even if I don't touch the joystick, do you have an idea?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Name and value component please
« Reply #7 on: June 11, 2020, 09:28:17 AM »
It's because of the calibration of the old stick to the controller versus how the new one is. You might go thru 10 sticks or more before you found one that worked  good enough. There are several ways to get it working right again.

https://www.acidmods.com/forum/index.php/topic,44643.msg335489.html#msg335489
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline vincaldo

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Re: Name and value component please
« Reply #8 on: June 12, 2020, 07:55:31 AM »

Indeed, after having put the 100nF capacitor back in place, I still have the same problem. Is the card just double-sided or multilayer?
I saw that a missing patch was missing on one of the sticks of the joystick. thank you
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Name and value component please
« Reply #9 on: June 12, 2020, 08:18:14 AM »
That board is 4 layers. https://www.acidmods.com/forum/index.php/topic,44645.0.html

A slight drift has nothing to do with anything missing. The controller is calibrated after it is made with the sticks that it was made with. Replacing a stick can cause a little bit of drift, because no two of them are exactly the same.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal