Author Topic: jdm030- option button always pressed  (Read 912 times)

Offline spitaleet

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
jdm030- option button always pressed
« on: February 03, 2020, 07:10:16 PM »
Good evening.
The client brought me this control that took rain ...
 The problem identified: option button is always pressed, I tested the button, everything is ok, woks normally and is not shorted.

Is there a component responsible for this button? or does the information go directly to the processor?
Ty for any help!

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: jdm030- option button always pressed
« Reply #1 on: February 04, 2020, 05:08:02 AM »
It goes directly to the MCU. I haven't tested the actual limit, but it doesn't have to be shorted to register as a button press. If the Tact has some corrosion inside of it or the trace or even BGA connections under the MCU are messed up that could be causing the issue.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline spitaleet

  • Chief squatting Hard
  • *
  • Posts: 12
  • Post quality +0/-0
  • Acidmods User
Re: jdm030- option button always pressed
« Reply #2 on: February 04, 2020, 11:16:30 AM »
Exact!
 Actually, the button does not close short to give the signal, I made the removal and the problem is gone.
 Button changed, everything working, thank you!

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: jdm030- option button always pressed
« Reply #3 on: February 04, 2020, 12:02:08 PM »
Welcome.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal