Console Modding------ ( Here you can talk about your favorite Consoles ) > XBOX 360

xbox 360 wireless controller sensor analogue trace broken....

(1/3) > >>

zis2104:
I tried to replace sensor analog of xbox 360 controller wireless and i have broken...how i could fix?

RDC:
You will have to solder to a couple of vias to repair that damage now.

https://www.acidmods.com/forum/index.php/topic,34545.0.html

zis2104:
https://www.acidmods.com/RDC/360/Wireless_Matrix_Bottom.jpg

wait, i need solder only 4 four trace for the sensor? and the other pin?

RDC:
You need those 4, and also make sure the AN+ and Ground for each POT is also connected. The Grounds of them look alright in those pics, but the AN+ need connected, and they can go to TP7 on the board.

zis2104:
Ehm sorry this is my first time, AN+ where is? and  how i conneted to pot? you can show me with a pics?

Navigation

[0] Message Index

[#] Next page