xbox one controller 1537only work plugged

[spitaleet]

Good evening.
I have this joystick on the bench with the following situation:
It works normally on cable, however, when connecting by battery, the led just flashes without synchronization, and when pressing the synchronize button, nothing happens (no lights).

I did the basic tests:
*no short on the primary regulators.
* I replaced the Q9.
*nothing heats up.
*sync button works fine on test.

Any tips?

[spitaleet]

Solved!
The routed of TP6 point is open, jumper it and... work 

[oasanshes]

I have the same problem, how did you jumper it? Thanks

[RDC]

TP6 is on the MCU board and part of the wirless circuit, no idea how that could have caused that issue.

Check and make sure L1 is on the button/power board, it can get knocked off. Also look for any cracks in the PCB.