« previous next »
Pages: [1]   Go Down

Author Topic: xbox one sync button replacement  (Read 1772 times)

Offline imran421

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Acidmods User
xbox one sync button replacement
« on: May 17, 2020, 08:07:45 PM »
Any who can point me please, where to find the sync switch (SW2) on 1708 board. I tried ebay but did not find it.
Thanks
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox one sync button replacement
« Reply #1 on: May 17, 2020, 09:23:57 PM »
It's a TL3340AF160QG, same thing they used on the wireless 360 controllers. - https://www.digikey.com/product-detail/en/e-switch/TL3340AF160QG/EG4627CT-ND/1885974
« Last Edit: May 17, 2020, 09:25:28 PM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline imran421

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Acidmods User
Re: xbox one sync button replacement
« Reply #2 on: May 19, 2020, 01:43:19 AM »
Thanks for the reply. What is the best way to install them. Hotair or soldering
Thanks
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox one sync button replacement
« Reply #3 on: May 19, 2020, 01:49:36 AM »
Depends which you're more comfortable with and/or have access to. I'd remove the old one, clean of the pads with solder braid, then rubbing alcohol, then a few dabs of solder paste and hot air it on there.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline imran421

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Acidmods User
Re: xbox one sync button replacement
« Reply #4 on: May 19, 2020, 07:36:50 AM »
I think the hot air will melt the switch. it is way to small to solder.
Thanks
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox one sync button replacement
« Reply #5 on: May 19, 2020, 10:26:14 AM »
The hot air could melt the switch, if used improperly, not will melt it because you think so.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal