« previous next »
Pages: [1]   Go Down

Author Topic: 1708 left joy stick remains down  (Read 1001 times)

Offline imran421

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Acidmods User
1708 left joy stick remains down
« on: May 19, 2020, 08:49:44 PM »
I have this 1708 board. It left joy stick does not go up. I changed joy stick but the result is same. Checked the resistance for tp64 with one of the joy stick pressing down, gives some resistance. But TP63 shows nothing.
Any one who guide how to tourble shoot this issue?
Thanks
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1708 left joy stick remains down
« Reply #1 on: May 20, 2020, 10:13:52 AM »
Check the voltage on TP63 with the controller on.

If it measures 1.8v, then either..

A - The Ground connection (Top lead) for that LSY POT is open.
B - The AN+ connection (Bottom lead) for that LSY POT is shorted to the Wiper (middle lead) connection.

Around 0.9v is what it should measure with the Stick in the center position. Pressing up the voltage decreases, pressing down the voltage increases.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline imran421

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Acidmods User
Re: 1708 left joy stick remains down
« Reply #2 on: May 20, 2020, 11:04:54 AM »
Sorry to ask dumb question. What is LSY?
Logged

Offline imran421

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Acidmods User
Re: 1708 left joy stick remains down
« Reply #3 on: May 20, 2020, 11:47:11 AM »
0.9V when the joystick in the middle.
Logged

Offline imran421

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Acidmods User
Re: 1708 left joy stick remains down
« Reply #4 on: May 20, 2020, 12:23:09 PM »
Found the issue. The middle trace was broken.
Thanks for your help
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1708 left joy stick remains down
« Reply #5 on: May 20, 2020, 12:54:04 PM »
Left Stick Y-axis. (up/down)

That would have been next on the list if TP63 read normal.

When one is floating like that, aka not connected, it can go either way or act all funky and jump around.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline imran421

  • ½ Pint
  • *
  • Posts: 32
  • Post quality +0/-0
  • Acidmods User
Re: 1708 left joy stick remains down
« Reply #6 on: May 20, 2020, 12:59:20 PM »
Thanks for the help. I learned a lot from you.
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1708 left joy stick remains down
« Reply #7 on: May 20, 2020, 01:04:35 PM »
Welcome.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline wickated

  • King of the Wii-tards
  • *
  • Posts: 176
  • Post quality +0/-1
  • Acidmods User
Re: 1708 left joy stick remains down
« Reply #8 on: June 02, 2020, 06:13:21 AM »
Center pin of vertical axis routes to other side of board and throughhole often rips off.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal