Hi everyone, recently I bought a PS4 slim 2208b with a problem - it doesn't turn on. when you press the power button - the console immediately turns off. I have the same working console, so I connected a working power supply - ps4 turned on. Therefore, problems with the power supply. After that, I disassembled the power supply (board model N160A006P) and found swollen capacitors. replaced them with those that were at hand (the original ones will come in a month) - ps4 still doesn't work. After a little diagnosis, I found that the 5v line is normal, the problems are with the 12v line, after pressing the power button. I measured the resistance on the connector 12v - 13kom.

Measuring various elements and comparing them with the readings on the work board I found a mismatch. After I pulled out a 10k resistor, the resistance still remained 148Ohm.



I think this is a problem place, the only thing I would like to ask is how to find an element that gives such resistance?
many thanks for any advice)