JDM-011 R2 always pressed.

[irvgotti452]

I've looked around and read what I could but nothing has helped so far.
I've changed the daughter board and cable to a couple of spares as well as different conductive films. Any tips on how to trouble shoot would be great. Thanks 

[wickated]

problem with cpu unit. nothing could be done

[RDC]

If the daughter-board and motherboard contacts are not making a good enough connection it can act that way. Try pressing on the back of the board where the contacts are and see if it straightens or place a shim or two under the piece of foam at the daughter-board contacts so it will put a little more pressure on there when everything is back together.

[irvgotti452]

problem with cpu unit. nothing could be done

Bummer 

If the daughter-board and motherboard contacts are not making a good enough connection it can act that way. Try pressing on the back of the board where the contacts are and see if it straightens or place a shim or two under the piece of foam at the daughter-board contacts so it will put a little more pressure on there when everything is back together.

That didn't work as well. I'll try to hunt down a cpu unit. Thanks for the help guys

[sqweezy]

problem with cpu unit. nothing could be done

Thank you for your advice. I replaced the processor on my JDM-055 board and it solved the problem with the always pressed L2