« previous next »
Pages: [1]   Go Down

Author Topic: 1537 controller with both Triggers on 100%  (Read 863 times)

Offline renan.horste

  • Fart Sniffer
  • *
  • Posts: 48
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
1537 controller with both Triggers on 100%
« on: January 20, 2021, 05:16:52 PM »
Hello guys, i have a 1537 controllers with both triggers on 100%, i dont identify any shorts onf board, where i start to solve this problem?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1537 controller with both Triggers on 100%
« Reply #1 on: January 20, 2021, 10:02:05 PM »
I'd look around U9 and it's supporting components for an issue first, as it sounds like the Hall sensors aren't getting power.

MCU board schematic for the 1537 is here - https://acidmods.com/forum/index.php/topic,43204.0.html
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline renan.horste

  • Fart Sniffer
  • *
  • Posts: 48
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1537 controller with both Triggers on 100%
« Reply #2 on: January 22, 2021, 04:35:00 PM »
Solve the problem, i change the U9, when i did this the C33 capacitor show a short, i change he to and the problem was solved!!
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal