« previous next »
Pages: [1]   Go Down

Author Topic: Joypad Xbox One model 1697 c33 capacitor  (Read 2098 times)

Offline Raffaele1404

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Joypad Xbox One model 1697 c33 capacitor
« on: April 16, 2021, 09:18:29 AM »
Hi, I'm trying to repair an Xbox One Controller Model 1697 I found the c33 capacitor on the BUTTON / POWER BOARD BOTTOM shorted.  Can anyone tell me the size and capacity of this capacitor?  thank you
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Joypad Xbox One model 1697 c33 capacitor
« Reply #1 on: April 18, 2021, 01:57:19 PM »
That Cap is on the 3.3v rail, so unless you removed it and tested it, that short could be any number of places. If you removed it and it was shorted, and now everything is working again, then you can put anything back in there from 4.7uF to 47uF really.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Raffaele1404

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: Joypad Xbox One model 1697 c33 capacitor
« Reply #2 on: April 18, 2021, 04:23:00 PM »
Yes I removed it and it is shorted, in fact there were two other shorted capacitors but removing the c33 the short is gone.  Tomorrow I will try to see if it works without a capacitor, if any voltage is fine, just that it has a range from 4.7uF to 47uF?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Joypad Xbox One model 1697 c33 capacitor
« Reply #3 on: April 18, 2021, 07:30:00 PM »
It should be rated for 6.3v or more since it's on the 3.3v rail.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Raffaele1404

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: Joypad Xbox One model 1697 c33 capacitor
« Reply #4 on: April 21, 2021, 07:35:31 AM »
Hi, I found some 10uf smd capacitors with different voltages 6,3 or 16v or 25v which one do you recommend?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Joypad Xbox One model 1697 c33 capacitor
« Reply #5 on: April 21, 2021, 12:48:32 PM »
Any of them will work.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Raffaele1404

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Acidmods User
Re: Joypad Xbox One model 1697 c33 capacitor
« Reply #6 on: April 21, 2021, 03:38:06 PM »
ok, thanks.
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal