Dear professionals,
I would like to ask those of you who have experience what the causes of the following situation might be:
I have some faulty 1708 MCU boards with analog issues and actually all of them have the same problem. The Y axis is up slightly but I can't move it anywhere.The x-axis is still working.
There is where only the right or the left or both.
I did the following steps:
- I replaced the analog.
- I have checked the circuitry to see if there is a broken or damaged motherboard but no.
These did not help
Unfortunately I don't know which parts and what kind of unit of measure should do to find a possible faulty part that is causing this.
Is it possible that the microsoft chip on the SOC board is faulty or one of the surrounding components?
I want to learn and understand these mistakes more deeply than replacing parts.
Thanks in advance for your help and advice.
Kind regards
Frank
