Console Modding------ ( Here you can talk about your favorite Consoles ) > 360 Controllers / 360 Rapid Fire Controllers

Wireless Matrix cant turn ON after long time not used

(1/1)

robbayani:
hiii excuse me.. i want ask about my controller..

my xbox 360 controller cant turn on again after long time keep in box (with battery inserted)..
now, after  i change with fresh battery stil not power up..
trying with play & charge cable still not power up..
using another working controller battery compartment + new battery still not power up..

my board is Matrix with Shielding, still very clean until now..
maybe its completely broken??
how easy way to check??

RDC:
There was a via that liked to go bad on those Wireless Matrix boards that would open up and kill them. You couldn't tell from looking at them they were bad either. I used to use a pin vise and drill them out and toss a 30awg wire in there and solder both sides to restore the connection. No idea if that's the issue with yours or not though. It's been about 15 years now since I've worked on one of those things.

robbayani:

--- Quote from: RDC on May 29, 2022, 08:43:52 PM ---There was a via that liked to go bad on those Wireless Matrix boards that would open up and kill them. You couldn't tell from looking at them they were bad either. I used to use a pin vise and drill them out and toss a 30awg wire in there and solder both sides to restore the connection. No idea if that's the issue with yours or not though. It's been about 15 years now since I've worked on one of those things.



--- End quote ---
sorry.. im forgot  ask on this forum.. hahaa

just conecting two side right??
maybe im try using cable first before drill the board..
thankz for clue RDC

RDC:
Yes the via just connects top and bottom together on that board, it has no internal layers.

Navigation

[0] Message Index