« previous next »
Pages: [1]   Go Down

Author Topic: Diode identification on Elite Series 2 Controller  (Read 302 times)

Offline Kaiju

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Diode identification on Elite Series 2 Controller
« on: March 07, 2023, 07:10:36 AM »
I'm looking for D25 and D3 on an Elite Series 2 controller. Also CR1. I replaced these diodes but accidentally replaced them with W5 instead of what they originally came with, it obviously didnt work, and now im looking for the real deal. Any help appreciated. Also this is the first time ive ever made a post here so be gentle if i do something wrong lol.
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2597
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Diode identification on Elite Series 2 Controller
« Reply #1 on: March 07, 2023, 11:42:32 AM »
There is a D3 and CR1 on each of the top and bottom boards.

If you're asking about the ones on the bottom board, D3 and CR1 are both marked

A2
25

.. and are possibly a 1N4148.

The D25 is marked W5 and is most likely a 3.6v Zener.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal