« previous next »
Pages: [1]   Go Down

Author Topic: JDM 030 Component Identification  (Read 710 times)

Offline And00

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Acidmods User
JDM 030 Component Identification
« on: July 22, 2023, 08:47:43 AM »
Working on a JDM 030 Ver.4 and i'm looking at this ?resistor? below the inductor:

                   


Both when soldered and desoldered it shows a reading of 0 ohm.
Is this just a fuse or is it a burnt resistor? Can anyone with a working 030 help?
« Last Edit: July 22, 2023, 08:48:20 AM by And00 »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM 030 Component Identification
« Reply #1 on: July 22, 2023, 05:36:43 PM »
Resistors are usually black or blue and have white on the bottom and sides, that there is most likely a Ferrite Bead given where it's at.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal