Author Topic: Razor 2 now in production (Read 54945 times)

noah03ark · « **Reply #30 on:** June 06, 2007, 04:36:27 PM »

well, i dunno...i mean he's a f**kin' genius so i can imagine he'd beable to think of somthing.....

i just dont wanna solder any more...might have to hire someone..

robin1989 · « **Reply #31 on:** June 09, 2007, 07:48:10 AM »

hey cyber are you going to be releasing a new acid flag lol

dedafmonteur · « **Reply #32 on:** June 09, 2007, 08:22:15 AM »

Quote from: cyberpyrot on June 04, 2007, 01:57:26 PM

funny huh? there is the flag and the razor side by side. Yes you guy's have been staring at the razor for months now

LOL, some guys didnt see it? lol

simcityltd · « **Reply #33 on:** June 09, 2007, 08:25:01 AM »

Quote from: robin1989 on June 09, 2007, 07:48:10 AM

hey cyber are you going to be releasing a new acid flag lol

lol dont think, that will be too obvious.

h4x0r911 · « **Reply #34 on:** June 09, 2007, 10:55:41 AM »

damn i always wondered y that had the same shape as the other pcb!

wow it was right in everyones face!

so with the razornub 2 will still need to remove the yellow ac plug right?

simcityltd · « **Reply #35 on:** June 09, 2007, 12:19:29 PM »

Quote from: h4x0r911 on June 09, 2007, 10:55:41 AM

damn i always wondered y that had the same shape as the other pcb!

wow it was right in everyones face!

so with the razornub 2 will still need to remove the yellow ac plug right?

Lol, im surprised that some people didnt even know.

Also we dont know about the charging plug yet

Wicked Insider · « **Reply #36 on:** June 09, 2007, 05:32:22 PM »

In due time it will arrive just be calm.
I my self can't wait but I'll practice what I preach till it does.
Keep up the good work and keep us informed of any updates.

Thanks

BABYGOAT · « **Reply #37 on:** June 09, 2007, 06:13:27 PM »

Way to go guys!!!
I knew about the flag being the razor, but im still considering making a homemade PCB and making my own razor until the Razor2 is released and i can buy a proper one!!!

Keep up the good work guys looking forward to the release

If ya need any help let me know if i can help

P.S- This is my new favourite forum page

Poseidon04 · « **Reply #38 on:** June 11, 2007, 10:05:31 AM »

Two Words

Can't Wait

Honestly this is the reason I stayed at acid mods. I have been through so many different forums regarding the PSP ... when I found acid mods and started poking around and saw the dual nub, I was hooked, and I have been ehre ever since!!! hahahah

-PoSeIdOn04

bamhm182 · « **Reply #39 on:** July 01, 2007, 02:17:37 AM »

I'm a new member, but I've been browsing the forum, reading up on the razor nub every now and than, it looks awesome, I can't wait to get one! Is there a release date for the new one yet?

Takahashi · « **Reply #40 on:** July 01, 2007, 11:12:29 AM »

No release date is yet planned. Just keep checking back for updates. If there are no updates then....well there are no updates, so ur asking for nothin o.O

Taigerr · « **Reply #41 on:** July 02, 2007, 12:55:11 AM »

This whole subject is such a tease!!!!! C'mon guys hurry up already

dedafmonteur · « **Reply #42 on:** July 02, 2007, 03:07:22 AM »

if you where the driver of a car you would like if they tested the car before taking it in production. testing: does it works, is it strong etcetra etcetra.

same is going on here

Takahashi · « **Reply #43 on:** July 07, 2007, 08:48:33 PM »

Anymore posts asking for a release date will simply be deleted....

simcityltd · « **Reply #44 on:** July 09, 2007, 12:50:34 PM »

Hey Guys, The Razor 2 Board is now Done!!!

Quote from: cyberpyrot on July 09, 2007, 07:43:03 AM

You may now reserve the most wanted board. We are now in the process of getting them mass produced. Remeber these boards are unlike the razor boards. They are multi layered PCB's. We designed them that way to make instalation flawless. you can now solder the wires to the bottom of the board.

For Reserves Contact info@coolmods.co.uk

Please include in the subject "reserve"

price will be $25 but there is no need to pay in advance you pay when ready to ship.

Remeber this is of limited quantity so make sure you send an email reserving your PCB...

Also keep in mind these boards can be used for the DS and the Wii Mote

Nemesis · « **Reply #45 on:** July 09, 2007, 02:23:01 PM »

it isnt out yet its available to reserve...

$25 isnt that bad actually

simcityltd:- Did i say that is was out? I said that it was done...

PspKicks316 · « **Reply #46 on:** July 09, 2007, 02:38:44 PM »

yeah,i reserved mine already i cant wait till it comes out!!!

pspdude · « **Reply #47 on:** July 27, 2007, 04:35:06 AM »

I sent an email for reservation but havnt go a reply yet it has been 4 days.

pspdude · « **Reply #48 on:** July 27, 2007, 05:05:41 AM »

do they send a reply after you have sent a reservation email??

thanks

MattZani · « **Reply #49 on:** July 27, 2007, 10:24:14 AM »

Nope, thats already been stated in the thread.

D1RK0305 · « **Reply #50 on:** August 03, 2007, 12:50:24 AM »

is this (or a newer razor version) gonna be compatible with the Slim version

? jus askin cuz i got a lot of hopes and dreams lol.

anteroom123 · « **Reply #51 on:** August 03, 2007, 01:42:52 AM »

yah it will probibly be compatible, but your most likely not going to be able to case it internally, its going to be like the a2d nub where it sticks out of the faceplate a bit.

MattZani · « **Reply #52 on:** August 03, 2007, 11:38:54 AM »

No, They will be making a RAZOR Slim which will be compatible, under the FP.

vodkkaa · « **Reply #53 on:** August 05, 2007, 12:22:54 AM »

how much soldering has to be done. will it be fairly simple and straight forward. if the nub becmes sold out will there be more produced because i want to wait until the razor is released so i can see what people say about it

Takahashi · « **Reply #54 on:** August 05, 2007, 11:49:27 PM »

All soldering is straight forward, simple depends on your skill. From what I believe you make the nub yourself but they sell the board and they may make more depending on how they sell the first time around.

Ilzwalrus · « **Reply #55 on:** August 06, 2007, 04:24:40 AM »

Quote from: Takahashi on August 05, 2007, 11:49:27 PM

All soldering is straight forward, simple depends on your skill. From what I believe you make the nub yourself but they sell the board and they may make more depending on how they sell the first time around.

The soldering is all gonna be done on the bottom of the board, like the original A2D. This makes it really simple. I think what people will have most trouble with is cutting the faceplate and fitting the nub properly.

Oh and I'm pretty sure it's just me, but I always have heaps of trouble getting the spring to fit back in. I try keep composed, but sometimes I feel like stabbing a kitten with a walrus tusk.

Takahashi · « **Reply #56 on:** August 06, 2007, 09:49:35 AM »

Quote from: Ilzwalrus on August 06, 2007, 04:24:40 AM

Oh and I'm pretty sure it's just me, but I always have heaps of trouble getting the spring to fit back in. I try keep composed, but sometimes I feel like stabbing a kitten with a walrus tusk.

I remember when I tried to stick the dual nub in omg I just felt like destroying my PSP cause everytime I went to put the analog in it would fall apart in some way or another....lol....

Ilzwalrus · « **Reply #57 on:** August 06, 2007, 11:45:46 PM »

Quote from: Takahashi on August 06, 2007, 09:49:35 AM

I remember when I tried to stick the dual nub in omg I just felt like destroying my PSP cause everytime I went to put the analog in it would fall apart in some way or another....lol....

Bah I know what you mean.
I ended up superglueing everything and after sometime I was like WOOT IT WORKED.

anteroom123 · « **Reply #58 on:** August 07, 2007, 12:13:53 AM »

hey... stop bragging... haha just because you guys got yours already!

Takahashi · « **Reply #59 on:** August 07, 2007, 01:02:30 AM »

The one im talking about isint the razor, its the original dual nub with the a2d board.

News:

Author Topic: Razor 2 now in production (Read 54945 times)