Author Topic: Help me make a perfect faceplate!  (Read 6399 times)

Offline LoyalistRevolt

  • Motor Mouth
  • *
  • Posts: 95
  • Post quality +0/-0
  • Gender: Male
Help me make a perfect faceplate!
« on: August 29, 2007, 02:55:13 PM »
I want to make a Special psp faceplate and I wanted to know if there is anyway to change the bottom of my psp where it says PSP and put MGS there and Where is says Sony I wanted to change it to konami.

Also I would like to know if there is a way to save the part of my faceplate that says psp when spray painting it?

Offline 4dP

  • Millennium Poster
  • *
  • Posts: 1426
  • Post quality +0/-0
  • Modder For Hire - AM Donator
    • Modder For Hire website Hire me
Re: Help me make a perfect faceplate!
« Reply #1 on: August 30, 2007, 01:36:40 AM »
  • spray paint w/ stensil
  • engrave w/ dremel
  • find and put a konami sticker on it

PINOY AKO

Offline LoyalistRevolt

  • Motor Mouth
  • *
  • Posts: 95
  • Post quality +0/-0
  • Gender: Male
Re: Help me make a perfect faceplate!
« Reply #2 on: August 30, 2007, 02:22:07 PM »
Any place you can think of I can get a sticker?

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Help me make a perfect faceplate!
« Reply #3 on: September 07, 2007, 01:56:05 PM »
You could see if they made/you could make a window sticker with the sticky side on the graphic, and stick it inside.
Retired Modder, minor dabbling from now on :P

Offline LoyalistRevolt

  • Motor Mouth
  • *
  • Posts: 95
  • Post quality +0/-0
  • Gender: Male
Re: Help me make a perfect faceplate!
« Reply #4 on: September 08, 2007, 10:05:56 AM »
  • spray paint w/ stensil
  • engrave w/ dremel
  • find and put a konami sticker on it


WTF IS dremel?

You could see if they made/you could make a window sticker with the sticky side on the graphic, and stick it inside.

Do you think you could explain more to me I'm a real n00b when it comes to spray paint my parents don't even want me doing it anymore because I passed out from the fuems last time. Do you think you could make me the stickers and i could buy them from you?

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: Help me make a perfect faceplate!
« Reply #5 on: September 08, 2007, 11:59:55 AM »
Umm... i've sprayed a PS1 in an inclosed room, im fine.

Dremel Is a rotational tool, spins around at like 4000rpm and can engrave etc.

I cant make the Stickers, but buy some Decal Paper and then print the design you want, then stick it on the inside and then spray over it.
Retired Modder, minor dabbling from now on :P

Offline LoyalistRevolt

  • Motor Mouth
  • *
  • Posts: 95
  • Post quality +0/-0
  • Gender: Male
Re: Help me make a perfect faceplate!
« Reply #6 on: September 17, 2007, 09:05:02 PM »
Umm... i've sprayed a PS1 in an inclosed room, im fine.

Dremel Is a rotational tool, spins around at like 4000rpm and can engrave etc.

I cant make the Stickers, but buy some Decal Paper and then print the design you want, then stick it on the inside and then spray over it.


Thank! I also passed out because I'm an idiot I was in a closet because I didn't want to mess up the real floors. I was hot and sweety and the fumes kind of made me fall a sleep till some one found me well that was off topic thanks though!

Offline stanz

  • Chief squatting Hard
  • *
  • Posts: 23
  • Post quality +0/-0
Re: Help me make a perfect faceplate!
« Reply #7 on: October 20, 2007, 09:52:16 PM »
Sorry for noob question

what does decal paper do and used for?

Offline Professor Fate

  • Motor Mouth
  • *
  • Posts: 90
  • Post quality +0/-0
  • Gender: Male
  • All your base are belong to us
Re: Help me make a perfect faceplate!
« Reply #8 on: January 09, 2008, 05:20:05 PM »
if you going to paint a face plate.  I would recommend that you get a coolmods clear faceplate and paint the inside of it.

Offline MARIOPARTY53

  • I DONT FAIL
  • BANNED
  • E = MC² Mad Scientist
  • *
  • Posts: 1526
  • Post quality +0/-0
  • Gender: Male
  • Pc Gaming Rules
Re: Help me make a perfect faceplate!
« Reply #9 on: January 11, 2008, 02:54:53 PM »
very very smart idea PF thanks  :tup: im gonna try that
put on the other side some of the clear will still show up like around screw holes etc
However today I was brutally raped by a door handle, and none of my friends helped me up off the floor after ten minutes, instead they all teabaged me, all 10 of them...

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: Help me make a perfect faceplate!
« Reply #10 on: January 17, 2008, 03:15:06 AM »
very very smart idea PF thanks  :tup: im gonna try that

i already did it and it looks pretty cool



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: Help me make a perfect faceplate!
« Reply #11 on: January 19, 2008, 04:06:11 AM »
that's because the painting i did sucked :P

it leaked almost everywhere because i wanted to try 2 colors

i'll make some pictures ;)



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal