Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Tutorials => Topic started by: CONSOLEvMODR on February 04, 2011, 11:51:46 PM
-
Alright i have been doing a lot of controller mods rapid fire, leds, etc. i have noticed that battery life sucks on them after. So i have built two controller mods that run 2 14430 li –ion cells charge time takes around 5 to 6 hours i have been getting about a week and a half to two weeks on a charge playing about 4 to 6 hours at a time. I’m working on a tutorial for you guys hope to have it finished by tomorrow evening. The batteries to do two controllers and one charger, protection PCB was under 65$.
No battery memory problems like ni-mh batteries
I’m sorry i didn’t post it right now but i hurt my back 3 weeks ago and the meds knock me out basically
Please don’t delete this i will have it up just thought you guys might like the idea
still working on this im going to post somes pics of a finished one
it has a legecy pic based viking rapid fire programmed through the PNC port, 2- 3mm white leds in the guide button and Red ROL
all black case from OEM parts
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg76%2Ftechguy4u87%2F2011-02-05163136.jpg&hash=c8e318a80423a2e09b6a6f948f0aff463c31413c)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg76%2Ftechguy4u87%2F2011-02-05163048.jpg&hash=82aaf4fe22340fe912ab7caa4267a20388b263f5)
This one has a red top black d-pad and sticks, li-ion powered with legacy pic based Viking rapid fire wired for duo aka Odin’s raven. 2 3mm white leds in the guide button blue ROL. Bottom half of the case is from a rapid fire gear lite controller mod has a nice satin like finish grip.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg76%2Ftechguy4u87%2F2011-02-16143123.jpg&hash=c284bb923582bf9918a4f09ca3c11618d1f6ff21)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg76%2Ftechguy4u87%2F2011-02-16142546.jpg&hash=826f7fd2d1bce8803e93dbdb7459151bfc3277e2)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg76%2Ftechguy4u87%2F2011-02-16142537.jpg&hash=55e62f311b8f1b53679087e91249e89cf661d248)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg76%2Ftechguy4u87%2F2011-02-16142525.jpg&hash=91b4b52dd15d0722dca6a2b91102ad1f26c33030)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi245.photobucket.com%2Falbums%2Fgg76%2Ftechguy4u87%2F2011-02-16142511.jpg&hash=af7208703ac936c1f33c342b9bc23e7adf13460a)
-
This should be good. Cant wait to see the tutorial finished bro. About how much exactly did this cost to do? I dont want to be fishing out 65 usd to do this even though you said it was under 65 usd, which basically is saying it will cost, at the most, 65 usd lol
-
65 usd is for one charger and parts to do two controllers. The charger is 15usd. Batteries are 3.25usd per batteries takes 2 per controller. Those jacks are 1.25usd they have a mechanical switch in them to disconnect batteries form the controller board while charging for an accurate charge and the protection pcb are 1.25 each two per controller.
So just one controller cost
15.00
6.50
2.50
1.25
One controller = around 26 usd
It’s taking me longer then I wanted it to because i contracted bronchitis