Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => Topic started by: GroundControl2MT on September 25, 2010, 05:49:12 PM

Title: PSP GO Dual Nub Solution UPDATE: 11/8 COMPLETE
Post by: GroundControl2MT on September 25, 2010, 05:49:12 PM: I'm making this mod using a ps3 six-axis controller, Its not so much a tutorial as more of a showing. The only thing stopping me form putting it back together is a second nub. I'm not 100% sure on the right analog stick wiring so if you see an error please point it out

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Flh4.ggpht.com%2F_WHYY23lh7HA%2FTJ6WNXBwM-I%2FAAAAAAAAABU%2Ffc27aeImlI4%2Fs400%2F100_1978.JPG&hash=4530bb49af855793675a5b9b86f362a62fac847f) (http://picasaweb.google.com/lh/photo/VHcHr-RZhje0hI7gc-5hdg?feat=embedwebsite)
Question: on the right analog stick, is that wire connected to 5 volts? I'm not 100% sure on the pot pinouts

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_WHYY23lh7HA%2FTJ6WNw6AjJI%2FAAAAAAAAABY%2FhNyJ711xQ8I%2Fs400%2F100_1979.JPG&hash=d06f874c196a0c30c98f87f327494fe6c8d34cc0) (http://picasaweb.google.com/lh/photo/5g4D4cN3S24cBa3mXM_APg?feat=embedwebsite)
This is the back of the left analog stick, I was this on a different guide, not sure if i need it though

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Flh3.ggpht.com%2F_WHYY23lh7HA%2FTJ6WOMm8NgI%2FAAAAAAAAABc%2FKndhEs3xObI%2Fs400%2F100_1980.JPG&hash=5803bae7557b8e9767fe90b8fef8173b4a14ac43) (http://picasaweb.google.com/lh/photo/6YIcDPUxocm5btA24LkQGg?feat=embedwebsite)
Sorry this is blurry, Its a razor x board

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Flh4.ggpht.com%2F_WHYY23lh7HA%2FTJ6WOtdzcmI%2FAAAAAAAAABg%2FytsyaoDU8Bw%2Fs400%2F100_1981.JPG&hash=834f112904dae275874556d3c1b46521595c17d9) (http://picasaweb.google.com/lh/photo/3BHvKZeYFUbPb1P5RR4Iuw?feat=embedwebsite)
This is the method I'm using to mount the nubs in place, they fit perfect in the old analog holes but theres no extra to mount them, If I flip the analog stick it fits around the hole and I can hot glue it down

Update 10/14

Razor X board wiring Complete, 100% working
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Flh3.ggpht.com%2F_WHYY23lh7HA%2FTLO0pWPqKwI%2FAAAAAAAAACc%2FT53U3S2PH8c%2Fs800%2F100_2026.JPG&hash=af92d655220c53986a4d43a1378d1d7391712adb)

Video: PSP GO Dual Nub Solution (http://www.youtube.com/watch?v=s3DY-b-uCLg#)
Title: Re: PSP GO Dual Nub Solution UPDATE: 10/14
Post by: GroundControl2MT on October 14, 2010, 05:57:06 PM: First post updated
Title: Re: PSP GO Dual Nub Solution UPDATE: 11/8 COMPLETE
Post by: GroundControl2MT on November 08, 2010, 11:31:05 AM: First post updated job complete
Title: Re: PSP GO Dual Nub Solution UPDATE: 11/8 COMPLETE
Post by: TwisTtheTwiTcH on November 08, 2010, 05:04:52 PM: Very nice. Are you working on getting it internalized?

-TwisT
Title: Re: PSP GO Dual Nub Solution UPDATE: 11/8 COMPLETE
Post by: techninjadude on January 17, 2011, 11:47:04 PM: Datz preety sik I havnt done duel nub yet but maybe.
YOU need to get it internal. because i dont want to be on the bus playing on my psp then having to take out a ps2 controller.
Title: Re: PSP GO Dual Nub Solution UPDATE: 11/8 COMPLETE
Post by: kink192 on January 19, 2011, 05:48:38 PM: Quote from: techninjadude on January 17, 2011, 11:47:04 PM
Datz preety sik I havnt done duel nub yet but maybe.
YOU need to get it internal. because i dont want to be on the bus playing on my psp then having to take out a ps2 controller.

internal on a psp go is pretty tough and emphasizing the urge for someone else to take the initiative to do it doesnt look good for you.
Title: Re: PSP GO Dual Nub Solution UPDATE: 11/8 COMPLETE
Post by: techninjadude on January 19, 2011, 11:27:49 PM: Sorry, I messed up writing.Some times I write things in the wrong way and the sentence ends up be a insult. I bet this one sounded like one. Lol, But nice job, your the first to do it.