21
PS4 Controllers/PS4 Rapid Fire Controllers / [BDM-030] Right Stick moves to the left - probably damaged a via
« Last post by SchwarzerAfri90 on April 11, 2024, 11:44:23 AM »Hey everyone,
I got a problem with a BDM-030 after installing hall effect sticks.
The right stick is constantly moving left. I damaged the trace for the up/down movement and fixed that fololowing the advice of RDC to remove solder mask an solder on a jumper.
The problem is that that all the traces for the left/right movememt seem intact, also the vias.
Also the sensor gets his voltage from the other axis via jumper. Also continuity-measured the three legs , the middle leg is neither grounded nor has i visible broken trace.
What could that else be ? The controller was working fine before.
I got a problem with a BDM-030 after installing hall effect sticks.
The right stick is constantly moving left. I damaged the trace for the up/down movement and fixed that fololowing the advice of RDC to remove solder mask an solder on a jumper.
The problem is that that all the traces for the left/right movememt seem intact, also the vias.
Also the sensor gets his voltage from the other axis via jumper. Also continuity-measured the three legs , the middle leg is neither grounded nor has i visible broken trace.
What could that else be ? The controller was working fine before.