Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: jesusma on June 01, 2022, 08:56:09 PM
-
Hello amigos.
I have made a lot of investigation before this post. I have a matrix 1 wireless controller. The following buttons do not work: D-down D-up and both click button on sticks. All these buttons are from D16 and D18. According to this diagram.(https://www.acidmods.com/RDC/360/DiagramWireless.png)
(https://www.acidmods.com/RDC/360/Wireless_Matrix_Top.jpg)
(https://www.acidmods.com/RDC/360/Wireless_Matrix_Bottom.jpg)
Continuity is confirmed in all traces to the MCU and the resistors and caps that are in the diagram. I swap the D16 and D18 but still not working.
Any other Idea will be appreciated thank you for your time.
-
Check the Orange/White trace that goes from IC1p40 to D16p3 and D18p3, suspect an open there. If that's good then IC1 is suspect.