Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Pic Programmers and Programs => Software => Topic started by: Fareham dave on October 29, 2012, 05:49:28 PM

Title: cant get winpic800 to work properly
Post by: Fareham dave on October 29, 2012, 05:49:28 PM

i have a PIC USB Automatic Programming Develop Microcontroller Programmer K150 ICSP Cable which connects via usb, the problem i am having is i cannot detect my programmer at all, i have been told it should show as comm port 3 but its not there, i installed libusb but i still cant detect my programmer. can anyone help please? i have been trying to get this working for 16hours now and still nothing

Title: Re: cant get winpic800 to work properly
Post by: Gizmo613 on October 29, 2012, 06:57:23 PM

I dont believe the k150 works with winpic.

Try this:
 http://www.mcumall.com/USB_PIC_CD.zip (http://www.mcumall.com/USB_PIC_CD.zip)

Title: Re: cant get winpic800 to work properly
Post by: Rodent on October 30, 2012, 04:43:52 AM

Try changing the settings in winpic800 or mplab also check for it under device manager. has to detect it some how. just not set up properly.

Title: Re: cant get winpic800 to work properly
Post by: Modded Matt on October 30, 2012, 06:02:21 AM

go into settings and select JDM