Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS4 => PS4 Controllers/PS4 Rapid Fire Controllers => Topic started by: irvgotti452 on October 04, 2020, 07:41:31 PM
-
I've looked around and read what I could but nothing has helped so far.
I've changed the daughter board and cable to a couple of spares as well as different conductive films. Any tips on how to trouble shoot would be great. Thanks :cool:
-
problem with cpu unit. nothing could be done
-
If the daughter-board and motherboard contacts are not making a good enough connection it can act that way. Try pressing on the back of the board where the contacts are and see if it straightens or place a shim or two under the piece of foam at the daughter-board contacts so it will put a little more pressure on there when everything is back together.
-
problem with cpu unit. nothing could be done
Bummer :cry2:
If the daughter-board and motherboard contacts are not making a good enough connection it can act that way. Try pressing on the back of the board where the contacts are and see if it straightens or place a shim or two under the piece of foam at the daughter-board contacts so it will put a little more pressure on there when everything is back together.
That didn't work as well. I'll try to hunt down a cpu unit. Thanks for the help guys
-
problem with cpu unit. nothing could be done
Thank you for your advice. I replaced the processor on my JDM-055 board and it solved the problem with the always pressed L2