21
Please help support the site by donating at the link below.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
21
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by SchwarzerAfri90 on April 18, 2024, 03:23:25 AM »22
Xbox One controllers/Xbox One Rapid fire Controllers / Re: XB1 Controller PCB Scans, Traces and Info - 1708 "Slim"« Last post by fatc2k6 on April 16, 2024, 01:53:32 AM »Regulator for the Triggers U9, or any of it's support components, C3, C32, C33, C35, C37, R38 or R40 or it could be the MCU not sending the signal to that Regulator. Could be U10 or U11 is shorted also, or any number of other things that I haven't seen before. Thanks , i shall check these points with my scope and dmm. 23
Xbox One controllers/Xbox One Rapid fire Controllers / Re: XB1 Controller PCB Scans, Traces and Info - 1708 "Slim"« Last post by RDC on April 15, 2024, 06:17:06 PM »Regulator for the Triggers U9, or any of it's support components, C3, C32, C33, C35, C37, R38 or R40 or it could be the MCU not sending the signal to that Regulator. Could be U10 or U11 is shorted also, or any number of other things that I haven't seen before.
24
Xbox One controllers/Xbox One Rapid fire Controllers / Re: XB1 Controller PCB Scans, Traces and Info - 1708 "Slim"« Last post by fatc2k6 on April 15, 2024, 05:29:29 PM »What could cause both triggers to be activating 100% as soon as the controller is powered up? I know the issue is with the mcu board as the issue remains with a known working power board.
25
PS4 Controllers/PS4 Rapid Fire Controllers / Re: [BDM-030] Right Stick moves to the left - probably damaged a via« Last post by SchwarzerAfri90 on April 11, 2024, 04:23:30 PM »Can be closed, was just stupid. New Sticks had shorter legs and the middle via hat a bad solder joint
26
PS4 Controllers/PS4 Rapid Fire Controllers / [BDM-030] Right Stick moves to the left - probably damaged a via« Last post by SchwarzerAfri90 on April 11, 2024, 11:44:23 AM »Hey everyone,
I got a problem with a BDM-030 after installing hall effect sticks. The right stick is constantly moving left. I damaged the trace for the up/down movement and fixed that fololowing the advice of RDC to remove solder mask an solder on a jumper. The problem is that that all the traces for the left/right movememt seem intact, also the vias. Also the sensor gets his voltage from the other axis via jumper. Also continuity-measured the three legs , the middle leg is neither grounded nor has i visible broken trace. What could that else be ? The controller was working fine before. 27
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by Worf on April 11, 2024, 03:25:45 AM »Hi. I see V1 and V2 microphone flex, are they interchangeable?
28
Xbox One / Re: Series X/S 1914 Controller no RSX RSY pad traceback« Last post by RDC on April 10, 2024, 01:52:39 PM »Sorry, didn't see your reply to this until now.
RSX is p15 of the SOC board, the schematic is in the thread that is linked above. 29
PS4 Controllers/PS4 Rapid Fire Controllers / Re: DualSense 5 Controller PCB Scans« Last post by RDC on April 10, 2024, 01:45:18 PM »Is there any chance to get some links for newer revisions into here or another pictures with more informations like the ones for the BDM-010 ?Sure is, you can hit the New Topic or Reply button and post it. Any images or info that I post comes from when I run across a new version and have the time to work on it. 30
Xbox One controllers/Xbox One Rapid fire Controllers / Re: XB1 Controller PCB Scans, Traces and Info - 1537« Last post by RDC on April 10, 2024, 01:29:48 PM »Welcome, not my first rodeo.
|