Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Xbox One => Xbox One controllers/Xbox One Rapid fire Controllers => Topic started by: Adampark on September 12, 2018, 04:33:18 AM
-
Hi, a friend told me too post on here and see if anyone can help me, I have just done a repair on my Xbox one elite controller and I have pulled one of the pads off underneath where the modual sits on and it no longer runs when presses in? Everything else works fine just won’t work when pressed in Could some one give me a litte help ? Or push me in the right direction I don’t mind paying for someone’s time just dont have the funds for a new controller! :beg: :beg: :beg:
Kind Regards
Adam
-
A good pic or two of the damaged area would be the most useful to help us help you out there. Also which controller is this? The sticker in the battery compartment will have the Model number, 1537, 1697, 1698 or 1708
-
Thanks for the reply i really appreciate it! The model is 1698, the pad on the back is removed and copper throughhole pot it won’t run anymore (L3) Looking forward to your reply Thanks for your help
(https://s8.postimg.cc/barcvktv5/11_D9_AF3_C-_C0_F6-419_B-_B8_F3-_F46_BCBBA0486.jpg) (https://postimg.cc/image/barcvktv5/)
(https://s8.postimg.cc/3us39stb5/4_CF4_EEB6-0_B6_A-4_BA1-9_F2_A-_B151_FAFBCFCA.jpg) (https://postimg.cc/image/3us39stb5/)
(https://s8.postimg.cc/usm0bj68h/964_D2183-_B9_CA-46_B7-858_F-_A0_A5_FF2_FBD7_F.jpg) (https://postimg.cc/image/usm0bj68h/)
(https://s8.postimg.cc/gm69gbasx/B62_A8_A88-883_B-42_B3-9_B0_E-5_FF25960_DDFD.jpg) (https://postimg.cc/image/gm69gbasx/)
(https://s8.postimg.cc/xzgjv6dtt/E4_CC1821-1_D64-429_C-81_ED-_BEC20623_EDB5.jpg) (https://postimg.cc/image/xzgjv6dtt/)
-
Solder a jumper wire from TP106 to the marked LSC (L3) lead.
(https://www.acidmods.com/RDC/XB1/1697%20BBB%20Adampark%20LSC%20Fix.jpg)
-
Well what can I say??? Your a genius!!! Thank you so much could you please send me your PayPal email I will drop you a donation! Have a drink on me! Keep up your good work :#1: :#1:
-
Welcome. You can hit the Donate link on the home page and just give it to the site.
https://www.acidmods.com/forum/index.php (https://www.acidmods.com/forum/index.php)
-
I have just sent a donation! Thanks again for your help :) :hifive:
-
Welcome, and Thanks.
-
Hey, sorry to jump in on this, wondering if there are any test points or jumper points to the left analogue potentiometer pads, I know the ground pads but the other 2 for both potentiometers would be great as I have no pads for them. Thanks in advance