Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: flasher on December 18, 2010, 01:54:17 PM
-
Hey guys
I just can't get this working.
https://www.acidmods.com/forum/index.php/topic,35291.msg285090.html#msg285090 (https://www.acidmods.com/forum/index.php/topic,35291.msg285090.html#msg285090)
These are the parts I used:
- 2N2222 H331 transistor
- 220 Ohm 0.25w Carbon 1/4w Resistor 220R
- Silicon Rectifier Diode 1N4001 1A 50V DO-41 RoHS
When I use a rumble motor, the voltage is always 0.47/0.48
When I use a led, the voltage is always 3.45
Even when there's no sound. So it seems that the voltage depends on the "consumer".
Checked the emitor and collector with a DMM, so I'm sure I ain't wiring it wrong. I even used a crocodile clip as heat sink while soldering so the transistor doesn't get damaged due to the heat.
Also tried the other way of Ghost_Death, but then I don't even get any voltage at all.
So I'm guessing I need other transistors? Or could I also do this with an LM386 chip?
Sorry for my bad English btw.
-
oh my god. i though i was the only one with with this problem! because i asked alot of people and they say these work... well they didnt for me and i just gave up on it. :cry2:
-
You should read the topic I linked, FOOKz is helping me out :)